Product Name: (S)-Diphenyl-3-pyrrolidine acetamide L-Tartaric Acid Salt
Synonyms: Not widely available under alternate labels
CAS Number: Not assigned in major chemical databases
Recommended Use: For research and laboratory use only
Manufacturer: Available through custom synthesis labs and fine chemical suppliers
Contact Information: Manufacturer’s main office or website provided on invoice
Emergency Phone: Reach out to regional poison control or emergency response service immediately after chemical exposure
Date Prepared: Refer to documentation provided with shipment for latest revision date
GHS Classification: As research material, precise classification may be pending, but potential irritation to skin, eyes, and respiratory tract is flagged
Signal Word: Warning (based on structural similarity to compounds with known risks)
Hazard Statements: May cause mild skin and eye irritation; inhalation can irritate respiratory system; not meant for human or animal consumption
Pictograms: Exclamation mark for irritant
Precautionary Statements: Avoid breathing dust, avoid skin and eye contact, use in a well-ventilated area, wash hands after handling
Other Hazards: Data gaps leave full toxicity profile unclear—handle with general caution suited for new organic compounds
Chemical Identity: (S)-Diphenyl-3-pyrrolidine acetamide L-Tartaric Acid Salt
CAS Number: No public CAS as of last review
Formula: C20H22N2O2 · C4H6O6 (molecular structure includes an organic cation and a tartaric acid counterion)
Concentration: Supplied as a single salt; impurities usually <1% by weight, but refer to lab COA
Impurities: Residual solvents and process byproducts generally minimized upon purification, check batch paperwork for specifics
Inhalation: Move to fresh air at once, keep airways open, seek medical attention for symptoms such as coughing, shortness of breath, or dizziness
Skin Contact: Remove contaminated clothing, wash skin thoroughly with soap and water, seek medical advice if irritation or rash occurs
Eye Contact: Rinse eyes slowly and gently with water for at least 15 minutes, remove contacts if present and easy to do, contact physician as soon as practical
Ingestion: Rinse mouth, do not induce vomiting, get medical help immediately, provide as much detail as possible about quantity and symptoms
Note to Physician: Treat using general supportive measures for unknown pharmaceutical compounds; no specific antidote established
Suitable Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or foam; choose media depending on surrounding fire type
Specific Hazards: Combustion may release carbon oxides, nitrogen oxides, and other mixed organic fumes
Protective Equipment: Firefighters must wear self-contained breathing apparatus and full protective gear
Special Procedures: Keep out of runoff drains and sewers, cool containers exposed to fire with water from a safe distance, ventilate area carefully post-incident
Personal Precautions: Wear protective gloves, safety goggles, and lab coat; avoid dust generation and contact with surfaces
Environmental Precautions: Prevent spilled material from entering drains, soil, or any water source
Containment Methods: Scoop up (avoid raising dust), then collect in sealable container for disposal
Cleanup Methods: Wipe area with damp, disposable towels after initial collection, ventilate until chemical odor dissipates
Decontamination: Dispose of all towels, gloves, and contaminated clothing through regulated hazardous waste streams
Safe Handling: Always wear gloves, goggles, and lab coat; keep containers tightly sealed and use within fume hood or well-ventilated workstation
Avoid: Dust formation, direct contact with eyes, prolonged skin exposure, eating or drinking in work area
Storage Recommendations: Store in tightly closed original container, keep in cool, dry location, and protect from direct sunlight and incompatible chemicals such as oxidizers
Transfer Protocol: Use tools like small scoopulas for removal; avoid spillage or contaminating container rim
Labeling: Ensure clear chemical and hazard labeling, with date of receipt and opening clearly marked
Engineering Controls: Use chemical fume hood and dedicated work area; keep eyewash and safety shower accessible
Respiratory Protection: If dust may become airborne, a NIOSH-approved respirator should be used
Skin Protection: Use nitrile or latex disposable gloves, change gloves immediately if torn or after direct contact with material
Eye Protection: Chemical splash goggles or face shield in case of operations with risk of splashing
Other Protective Equipment: Lab coat, long pants, closed-toe shoes all recommended
Hygiene Measures: Wash hands thoroughly before meals, after handling, and before leaving workspace
Appearance: White to off-white crystalline powder
Odor: Odorless or faint organic smell
Melting Point / Range: Data not widely published; refer to batch certificate
Boiling Point / Range: Decomposes upon heating, no specific boiling point
P.H: Not measured in water; expected to be neutral to mildly acidic
Solubility: Soluble in methanol, ethanol, and DMSO; low solubility in water
Vapor Pressure: Not relevant for a solid at ambient temperature
Flash Point: Not established, thermally stable under normal conditions
Explosion Limits: Not evaluated, but low volatility reduces risk
Other Properties: Stable crystals forecast from structure, avoid contact with acids and oxidizers
Chemical Stability: Stable under standard temperature and storage conditions
Reactivity: No dangerous reactions predicted with common lab reagents under proper storage
Incompatible Materials: Strong oxidizers, strong acids or bases
Conditions to Avoid: High humidity, excessive heat, sources of ignition
Decomposition Products: May give off carbon monoxide, carbon dioxide, nitrogen oxides, and other volatile organic fragments
Acute Toxicity: No animal or human LD50 published, but structural similarity to related compounds suggests risk of irritation and low acute toxicity
Skin Corrosion/Irritation: Powder can cause mild irritation, repeated exposure increases risk
Serious Eye Damage/Irritation: Contact produces stinging, tearing, possible redness
Respiratory Sensitization: Inhalation can trigger coughing, throat irritation
Ingestion: Effects unknown, but not for human or animal intake
Chronic Effects: Lack of studies on long-term effects, avoid repeated exposure
Carcinogenicity/Mutagenicity: Not classified by IARC or NTP as of latest review
Other Data: Due to knowledge gaps, treat as if toxic until proven otherwise
Ecotoxicity: No direct studies on aquatics, default to low solubility and limited mobility in water
Persistence and Degradability: Organic structure could slow breakdown in soil or water; likely inert unless broken by UV or microbial activity
Bioaccumulative Potential: Based on structure, low risk of bioaccumulation, but not fully assessed
Mobility in Soil: Poor solubility means low runoff potential; incident releases managed closest to source
Other Adverse Effects: As with most laboratory chemicals, avoid uncontrolled discharge; no ozone depletion risk
Disposal Methods: Gather waste in tightly-sealed, labeled container and deliver to licensed hazardous chemical disposal contractor
Incineration: Permitted at facilities with capable off-gas controls for nitrogen- and carbon-containing compounds
Packaging Disposal: Contaminated bottles, gloves, and towels treated as lab chemical waste
Sewer Disposal: Do not flush or pour down the drain; dispose only through regulated means
Regulatory Waste Code: Refer to local, state, or federal rules for unused pharmaceuticals and fine chemicals
UN Number: Not assigned as of last information survey
Transport Hazard Class: Not regulated by DOT, IMO, or IATA unless carried in hazardous volumes
Packing Group: Not designated
Label Requirements: Use standard laboratory chemical labeling and secondary containment for all shipments
Other Information: Domestic and international transport governed by local research chemical regulations; inform carrier if unusually large amounts shipped
Inventory Status: May not appear on TSCA, REACH, or Asian inventories owing to research-only status
SARA Title III: No components listed on SARA 302, 313 lists
OSHA Regulation: Handle according to OSHA standards for hazardous chemicals in laboratory settings
California Proposition 65: Not listed as of last review
Other Regulations: User must confirm compliance with all regional, national, and institutional chemical handling rules; safety/training required before use
Providing high-quality chemical products and logistics solutions for global trade partners.
