Product Name: (S)-Alpha,Alpha-Diphenyl-3-Pyrrolidineacetamide tartrate
Synonyms: (S)-3-(Diphenylmethyl)pyrrolidine-2-acetamide tartrate salt
CAS Number: 2195438-49-6
Recommended Uses: Research, synthesis, pharmaceutical development
Manufacturer: Name and contact information available on procurement documents
Emergency Contact: Refer to chemical supplier or local emergency response agency
GHS Classification: Not fully classified, research use only — handle with caution
Hazard Statements: May cause irritation to eyes, skin, or respiratory tract; avoid inhalation, ingestion, or contact
Precautionary Statements: Wear protective gloves, eye protection; do not eat, drink, smoke during use
Signal Word: Warning
Pictograms: Exclamation mark (if available)
Other Hazards: Not intended for drug, household, or other uses
Chemical Name: (S)-Alpha,Alpha-Diphenyl-3-Pyrrolidineacetamide tartrate
CAS Number: 2195438-49-6
Molecular Weight: Approx. 412 g/mol
Component: ≥ 98% (active substance, purity varies with supplier)
Other Ingredients: None intentionally added
Inhalation: Remove to fresh air immediately; seek medical attention if symptoms appear
Skin Contact: Wash affected area with plenty of soap and water; remove contaminated clothing
Eye Contact: Flush eyes thoroughly with water for minimum 15 minutes, lifting eyelids; get medical advice
Ingestion: Rinse mouth with water; never give anything by mouth to an unconscious person; seek medical help quickly
Acute Exposure Symptoms: Irritation, headache, nausea possible
Suitable Extinguishing Media: Dry chemical powder, carbon dioxide, foam, water spray
Unsuitable Extinguishing Media: High-pressure water jets (may spread chemical)
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, nitrogen oxides
Personal Precautions: Wear self-contained breathing apparatus and full protective equipment
Special Procedures: Avoid inhaling smoke, ventilate area, prevent runoff from firefighting from entering sewers or waterways
Personal Precautions: Evacuate unnecessary personnel, ventilate area, avoid dust formation
Protective Equipment: Gloves, eye protection, lab coat, suitable respirator
Environmental Precautions: Prevent further leakage or spillage, do not let material reach drains or soil
Spill Clean-up Methods: Sweep up, place in suitable, labeled container for waste disposal, clean area with damp cloth
Handling: Use only in well-ventilated areas; avoid contact with skin, eyes, clothing; wash hands thoroughly after handling; do not breathe dust
Storage: Store in tightly sealed container, away from incompatible substances, in cool, dry, well-ventilated location
Special Requirements: Protect from moisture, heat, direct sunlight; use with certified chemical safety measures
Incompatibilities: Avoid strong acids, bases, oxidizing agents
Control Parameters: No established occupational exposure limits
Engineering Controls: Fume hood, local exhaust recommended
Personal Protection: Nitrile gloves, safety goggles, protective laboratory clothing
Respiratory Protection: Use approved respirator in absence of adequate ventilation
Hygiene Measures: Wash hands and exposed skin before breaks or leaving the lab
Form: Solid
Color: White to off-white powder
Odor: Odorless or faint chemical odor
Melting Point: ~110–130°C (estimate, check supplier data)
Boiling Point: Not applicable
Solubility: Soluble in water, DMSO, and ethanol; insoluble in non-polar solvents
pH (1% solution): 4.0–5.5 (estimate)
Density: No data available
Flash Point: Not available
Partition Coefficient (log Pow): Not determined
Vapor Density: Not applicable
Chemical Stability: Stable under recommended storage and handling conditions
Thermal Decomposition: Decomposes at elevated temperatures, may release toxic fumes
Reactivity: Generally non-reactive under normal use
Incompatible Materials: Strong acids, bases, oxidizing agents
Conditions to Avoid: Excessive heat, moisture, direct sunlight
Hazardous Polymerization: Will not occur under standard conditions
Acute Toxicity: Not fully assessed; avoid all routes of exposure
Skin Corrosion/Irritation: May cause irritation upon contact
Serious Eye Damage/Irritation: Eye exposure may result in irritation, redness
Respiratory Sensitization: Dust or powder may cause throat or lung irritation
Chronic Effects: No long-term studies available; laboratory use only
Carcinogenicity/Mutagenicity/Reproductive Toxicity: No data available for this compound
Routes of Exposure: Inhalation, ingestion, skin and eye contact
Ecotoxicity: No data available; avoid release into environment
Persistence and Degradability: Not determined, use environmental best practices
Bioaccumulative Potential: Insufficient data
Mobility in Soil: Not established
Other Adverse Effects: Handle to minimize environmental discharge
Waste Treatment Methods: Treat as hazardous waste; collect in suitable containers for disposal by licensed chemical waste contractor
Product Disposal: Do not dispose of with household waste or sewer
Contaminated Packaging: Empty containers must be handled as hazardous
Regulatory Recommendations: Follow local, regional, and national regulations for laboratory chemical disposal
UN Number: Not regulated for transport
UN Proper Shipping Name: Not assigned
Transport Hazard Class: Not applicable
Packing Group: Not applicable
Environmental Hazards: Not determined
Special Transport Precautions: Ship in leak-proof packaging; avoid extremes in temperature
International Inventories: This substance may not appear on public chemical inventories (TSCA, REACH, DSL, etc.)
Regulatory Status: For laboratory research — not for drug, food, or household use
Safety, Health and Environmental Laws: Handle in accord with national chemical safety standards such as OSHA, WHMIS, GHS
Label Elements: See hazard identification for symbol and statement requirements
Other Regulatory Notes: Subject to restrictions for handling, use, and disposal as defined by chemical safety legislation
Providing high-quality chemical products and logistics solutions for global trade partners.
