Product Name: R-3-Ethylnipecotate-L-(+)-tartaric Acid Salt
Synonyms: (R)-3-Ethylpiperidine-2-carboxylic acid ethyl ester L-(+)-tartaric acid salt
CAS Number: Not available
Product Code: Assigned by supplier
Manufacturer: Information from supplier/commercial source
Recommended Use: Intermediate, research chemical, specialty building block
Contact Information: Manufacturer details from supplying company
Emergency Contact: Provided by local authority or manufacturer
GHS Classification: Not classified if not listed; data limited, treat with standard precautions.
Signal Word: Warning
Hazard Statements: May cause eye, skin, and respiratory irritation; limited toxicological data available; avoid dust formation.
Pictograms: Exclamation mark (if classified as irritant)
Precautionary Statements: Use protective gear. Wash thoroughly after handling. Avoid breathing dust.
Potential Health Effects: Eyes, skin: irritation possible. Inhalation: can cause coughing or throat discomfort. Ingestion: not intended for consumption; mild gastrointestinal upset possible.
Other Hazards: Unknown delay effects due to lack of testing; not expected to bioaccumulate.
Chemical Name: R-3-Ethylnipecotate-L-(+)-tartaric Acid Salt
Formula: C16H25NO8 (expected based on nomenclature)
Purity: Typically >98% (check CoA for batch-specific data)
Impurities: Organic byproducts, moisture >0.5% possible
Ingredient Contribution: Main hazard expected from the primary constituent
Additional Components: None deliberately added
Eye Contact: Rinse with running water for at least 15 minutes, lifting eyelids as needed. Remove any contact lenses and seek medical help if irritation continues.
Skin Contact: Remove contaminated clothes; rinse skin with soap and water. Get medical attention if rash develops.
Inhalation: Move to fresh air. Seek medical advice if breathing becomes difficult or coughing persists.
Ingestion: Rinse mouth out with water. Do not force vomiting. Consult physician immediately.
Most Important Symptoms: Irritation, redness, mild coughing.
Immediate Medical Attention/Special Treatment: Treat symptoms. Provide material SDS to emergency personnel.
Suitable Extinguishing Media: Dry chemical, CO2, foam, or water spray for larger fires. Avoid direct water stream.
Unsuitable Extinguishing Media: High-pressure water jets may spread fire.
Specific Hazards: Combustion yields CO, CO2, nitrogen oxides; toxic fumes possible.
Protective Equipment for Firefighters: Full protective clothing, NIOSH-approved SCBA recommended.
Firefighting Instructions: Control runoff. Stay upwind. Cool affected containers with water spray.
Personal Precautions: Wear gloves, goggles, dust mask. Ventilate area. Avoid forming dust.
Environmental Precautions: Prevent further leakage or spillage if safe. Keep away from surface water drains.
Cleanup Methods: Vacuum or sweep up material and place in disposal container. Wash spill area with soap and water.
Disposal: See Section on disposal.
Handling Practices: Work in a well-ventilated area. Do not eat, drink, or smoke while using this chemical. Avoid inhalation, ingestion, contact with skin and eyes.
Storage Conditions: Store in cool, dry, ventilated place. Keep tightly closed. Protect from humidity, heat, direct sunlight.
Incompatible Materials: Strong oxidizing agents, acids, bases; avoid storing with food products.
Special Handling Notes: Ensure SDS available to all personnel. Practice safe laboratory hygiene.
Occupational Exposure Limits: Not established. Use containment and PPE due to unknowns.
Engineering Controls: Use fume hood or local exhaust; keep containers closed.
Eye Protection: Safety goggles with side shields.
Skin Protection: Chemical-resistant gloves (nitrile, neoprene).
Body Protection: Standard laboratory coat or apron.
Respiratory Protection: Dust mask or respirator in enclosed or high-dust areas.
Hygiene Measures: Wash hands after use. Remove contaminated clothing promptly.
Appearance: White to off-white powder or crystalline solid.
Odor: Mild, not specified.
Odor Threshold: Data not available.
pH: Not determined.
Melting Point/Freezing Point: Approximate value: 110–150°C (estimated).
Boiling Point/Range: Decomposition likely before boiling.
Flash Point: Not available.
Evaporation Rate: Not established.
Flammability: May be combustible if heated.
Vapor Pressure: Not significant at room temperature.
Relative Density: Not measured.
Solubility: Expected to dissolve in water and polar organics.
Partition Coefficient: Not available.
Auto-Ignition Temperature: Not determined.
Decomposition Temperature: Not documented.
Viscosity: Not relevant for a solid.
Chemical Stability: Stable under normal handling and storage conditions.
Hazardous Reactions: Strong acids, bases, oxidizers may cause decomposition.
Incompatible Materials: Avoid contact with oxidizing substances.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, nitrogen oxides if heated to decomposition.
Conditions to Avoid: Moisture, excess heat, sparks, open flames.
Likely Routes of Exposure: Eye, skin, inhalation, ingestion.
Acute Effects: Limited data; can cause irritation.
Chronic Effects: Not studied; no information on sensitization or carcinogenesis.
Toxicity Information: No animal or human toxicity data identified.
Additional Symptoms: Redness, coughing, sore throat possible on contact.
Medical Observation: Seek evaluation if exposed beyond minor irritation.
Ecotoxicity: No established data; low volume/low environmental exposure expected from lab use.
Persistence and Degradability: Data not available; organic components.
Bioaccumulative Potential: Not expected to bioaccumulate due to ionizable groups.
Mobility in Soil: Expected to have some water solubility, may migrate in water.
Other Adverse Effects: Avoid widespread release to environment.
Waste Treatment Methods: Collect and store waste in sealed, labeled containers.
Disposal of Product: Take to approved chemical disposal facility; follow local, regional, national rules.
Disposal of Packaging: Contaminated packaging must also be handled as hazardous waste.
Special Precautions: Avoid direct disposal to drains, water systems.
UN Number: Not regulated for transport.
UN Proper Shipping Name: Not classified.
Transport Hazard Class: Not applicable.
Packing Group: Not applicable.
Environmental Hazards: Not classified.
Special Transport Precautions: Prevent spillage or dusting in transit; pack securely.
Regulatory Transport Information: Check local/international regulatory codes before shipping.
Safety Health and Environmental Regulations: Zero established specific regulations globally at current time.
OSHA Regulatory Status: Not listed.
SARA Title III Status: Not subject.
TSCA Inventory: Not listed.
REACH Status: Not pre-registered.
Other Regulations: Subject to general workplace safety provisions and chemical hygiene plan.
Labeling Requirements: Use caution with unknown toxicity; apply standard precautionary labeling.
Training Requirements: Ensure users are trained in laboratory chemical safety including spill and first aid response.
Providing high-quality chemical products and logistics solutions for global trade partners.
