Product Name: Coppertartratehydratebluegreenxtl
Chemical Formula: C₄H₄CuO₆·xH₂O
Synonyms: Copper(II) tartrate hydrate, Blue-green crystalline
Recommended Use: Laboratory reagent, chemical synthesis
Manufacturer: [Manufacturer Name]
Emergency Contact Number: [Insert relevant contact data]
GHS Classification: Acute toxicity (oral, dermal), Skin irritant, Eye irritant, Environmental hazard (aquatic)
Signal Word: Warning
Hazard Statements: Harmful if swallowed, causes skin and eye irritation, may cause respiratory irritation, toxic to aquatic life
Pictograms: Exclamation mark, environment
Precautionary Statements: Do not breathe dust, wash hands thoroughly after handling, avoid release to the environment, use protective gloves, eye protection, and clothing
Chemical Name: Copper(II) tartrate hydrate
CAS Number: 815-82-7
EC Number: 212-397-3
Concentration: 98–100% (as supplied, with hydrate content varying by supplier)
General Advice: Move affected person from exposure to fresh air, seek immediate medical attention in case of persistent symptoms
Inhalation: Remove person to fresh air, keep warm and at rest, obtain medical aid
Skin Contact: Rinse skin immediately with soap and plenty of water, take off contaminated clothing
Eye Contact: Rinse cautiously with water for several minutes, seek medical attention for continued irritation
Ingestion: Rinse mouth, never give anything by mouth to an unconscious person, seek medical help, do not induce vomiting unless instructed by medical personnel
Suitable Extinguishing Media: Water spray, foam, dry chemical, carbon dioxide
Unsuitable Media: Avoid strong water jets
Special Hazards: May produce toxic fumes (copper oxides, carbon oxides) on combustion
Protective Equipment for Firefighters: Wear self-contained breathing apparatus and protective clothing, keep containers cool with water spray from a safe distance
Personal Precautions: Avoid breathing dust, use adequate ventilation and personal protection
Environmental Precautions: Prevent entry into sewers, water courses, or soil
Spill Response: Sweep or vacuum up material carefully to avoid dust, contain and collect spillage in appropriate containers, dispose using safety guidelines
Safe Handling: Use within a chemical fume hood if available, avoid dust generation, minimize contact with skin and eyes, use personal protective equipment
Conditions for Safe Storage: Store in a tightly sealed container in a cool, dry, well-ventilated area, away from incompatible substances (strong acids, strong bases, oxidizers), protect from moisture, segregate from food and drink
OELs/PEL: Copper compounds (dust and mist) OSHA PEL: 1 mg/m3 (as Cu)
Engineering Controls: Use local exhaust ventilation to keep airborne concentrations below occupational limits
Personal Protective Equipment: Chemical-resistant gloves, safety goggles, lab coat or apron, suitable respirator in case of inadequate ventilation
Environmental Exposure Controls: Avoid release to environment by using proper containment and disposal procedures at the workplace
Appearance: Blue-green crystals or powder
Odor: Odorless
pH: Not applicable (solid form)
Melting Point: Decomposes before melting
Boiling Point: Not available
Solubility: Water soluble, insoluble in most organic solvents
Vapor Pressure: Not applicable
Density: around 2.25 g/cm³
Partition Coefficient: Not determined
Other Properties: Hygroscopic, may darken or decompose under high temperatures
Chemical Stability: Stable at room temperature under recommended conditions
Possibility of Hazardous Reactions: None under normal process; reacts with strong acids and strong oxidizing agents
Incompatible Materials: Strong acids, strong bases, oxidizers
Hazardous Decomposition Products: Copper oxides, carbon monoxide, carbon dioxide on heating or combustion
Conditions to Avoid: Extreme heat, moisture, exposure to incompatible materials
Acute Toxicity: Harmful if swallowed; oral LD50 for copper compounds in the range of 470–960 mg/kg (rat, data for related compounds)
Skin and Eye Irritation: Causes irritation; immediate exposure may cause redness and pain
Sensitization: Repeated or prolonged contact may cause allergic reactions to sensitized individuals
Chronic Effects: Prolonged or repeated exposure may result in toxic effects to the liver and kidneys; copper build-up can lead to Wilson’s disease
Routes of Exposure: Inhalation, ingestion, skin and eye contact
Carcinogenicity, Mutagenicity, Reproductive Toxicity: No evidence in humans for carcinogenic or reproductive effects at exposure levels typically encountered in laboratory settings
Aquatic Toxicity: Very toxic to aquatic life, copper ions can accumulate in sediments and bioaccumulate in aquatic organisms
Persistence and Degradability: Does not readily degrade in the environment
Bioaccumulative Potential: Potential exists due to copper accumulation in soils and organisms
Mobility in Soil: Moderately mobile, binds to organic material and clay
Other Adverse Effects: High concentrations in waterways can disrupt aquatic ecosystems
Waste Handling: Must be collected and disposed of as hazardous waste in accordance with local, regional, and national regulations
Container Disposal: Containers holding residues must be treated as hazardous, given to approved waste disposal contractors
Precautions: Do not discharge waste to drains or environment, segregate from regular waste streams
UN Number: 3077
UN Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (contains copper(II) tartrate hydrate)
Transport Hazard Class: 9 (Miscellaneous dangerous substances and articles)
Packing Group: III
Special Precautions: Avoid release into the environment, keep container tightly closed during transport, comply with all local and international laws during shipping
TSCA Status: Listed
EC Inventory: Listed
REACH Registration: Required for import or manufacture in applicable jurisdictions
SARA Title III: Subject to reporting under Section 313 as a toxic chemical (copper compounds)
Other Regulations: Comply with workplace safety, environmental, and transport regulations at local, state, and federal levels