Product Name: Chromium, diaquatetrachloro(mu-(N-ethyl-N-((tridecafluorohexyl)sulfonyl)glycinato-O1:O1'))-mu-hydroxybis(2-propanol)di-
Synonyms: Chromium complex with perfluoroalkyl glycine and isopropanol
Manufacturer Information: Contact chemical supplier for current address and emergency phone
Recommended Use: Laboratory reagent, specialty chemical applications
Restrictions on Use: Do not use in food, drug, or cosmetic manufacturing
Emergency Contact Phone: Local poison control or emergency support services
Classification: Aquatic Toxicity (Chronic), Skin Sensitizer, Eye Irritant, Acute Toxicity (Oral/Inhalation), Carcinogenic (possible, based on chromium content)
Hazard Statements: May cause skin and eye irritation, sensitization following exposure, suspected carcinogen, harmful to aquatic life with long lasting effects
Signal Word: Warning
Precautionary Statements: Avoid breathing dust/fume/gas/mist/vapors/spray, wear protective gloves, avoid release to the environment, wash hands thoroughly after handling
Label Elements: Exclamation mark, Environment, Health hazard pictograms
Chemical Identity: Complex chromium compound with perfluoroalkyl sulfonyl glycinato and isopropanol ligands
Components: Chromium (hexavalent or trivalent, dependent on synthesis route) up to 10%, Tetrachloro groups up to 20%, Perfluoroalkyl group (chain C6F13) up to 50%, Glycine derivative up to 10%, Isopropanol complex up to 10%, Water (aqua, bound form) up to 5%
CAS Numbers: Varies per constituent, chromium 7440-47-3, perfluoroalkyl glycine derivative not assigned, isopropanol 67-63-0
Impurities: Trace residual solvents, chloride, and unreacted starting material possible in low percentages
Inhalation: Remove individual from exposed area to fresh air, keep at rest, seek medical attention for breathing difficulties or persistent symptoms
Skin Contact: Wash exposed skin using soap and plenty of water for at least 15 minutes, remove contaminated clothing, seek medical advice for persistent redness or irritation
Eye Contact: Flush eyes gently but thoroughly with clean water, holding eyelids apart, for at least 15 minutes, seek medical attention if pain or vision changes occur
Ingestion: Rinse mouth thoroughly, do not induce vomiting unless directed by medical personnel, seek immediate medical attention, provide product label or MSDS if possible
Most Important Symptoms and Effects: Rashes, respiratory irritation, watery eyes, headache, long-term effects possible from repeated exposure (chromium hazard, sensitization)
Suitable Extinguishing Agents: Water spray, dry chemical, carbon dioxide, foam
Specific Hazards: Decomposition generates toxic gases including hydrogen chloride, phosgene, sulfur oxides, carbon monoxide, carbon dioxide, perfluorinated compounds
Firefighting Procedures: Full protective gear and self-contained breathing apparatus required, prevent run-off to water sources, cool containers with water
Special Protective Equipment: Chemical-resistant suit, gloves, SCBA
Explosion Data: Non-explosive in standard form, but can react with strong reducing agents or oxidizers to evolve hazardous material
Personal Precautions: Ventilate area, wear gloves, eye protection, suitable respiratory protection, prevent contact with skin and eyes
Environmental Precautions: Prevent release into drains, surface water, soil, collect spillage using non-combustible absorbent, dispose via approved chemical waste stream
Methods for Cleaning Up: Sweep up material carefully, minimizing dust generation, place in clearly labeled containers, wash contaminated surfaces with large amounts of water, clean tools used with detergent, avoid metal tools if risk of corrosion
Handling: Wear suitable PPE (gloves, lab coat, goggles), handle within well-ventilated fume hood, avoid inhalation, ingestion, avoid formation of dust or aerosols, do not eat or drink near material, do not pipette by mouth
Storage Requirements: Store in tightly closed containers, ideally glass or compatible polymer, in dry, cool, well-ventilated location away from direct sunlight, strong acids, bases, strong oxidizing and reducing agents, keep away from food and drinking water sources
Incompatible Materials: Strong reducing agents, concentrated mineral acids, strong bases, incompatible metals
Special Storage Considerations: Label all containers with product identity and hazard information, periodically inspect containers for leaks or corrosion
Exposure Limits: Chromium OSHA PEL 0.5 mg/m3 (metal and insoluble salts), ACGIH TLV 0.05 mg/m3 (hexavalent), perfluorinated compounds not established
Engineering Controls: Use adequate local exhaust and general ventilation, especially in hot or dusty environments, work in chemical fume hood where possible
Personal Protective Equipment: Chemical-resistant gloves, safety goggles, long-sleeved lab coat or apron, if risk of inhalation use approved respirator (P100 or equivalent), emergency eyewash and shower facilities accessible
Hygiene Measures: Wash hands before eating, drinking, or using bathroom, avoid cross-contamination, do not wear contaminated clothing out of work area, clean reusable PPE between shifts
Appearance: Off-white to pale yellow solid or crystalline powder
Odor: Mild chemical smell with possible alcohol tone
Odor Threshold: Not established
pH (aqueous solution): Slightly acidic to neutral (5-7)
Melting Point/Freezing Point: Decomposes above 200°C
Boiling Point: Not applicable (decomposes)
Flash Point: Not applicable, likely non-flammable due to inorganic content
Evaporation Rate: Not established
Flammability: Not flammable under normal conditions
Vapor Pressure: Negligible at ambient temperature
Vapor Density: Not established
Relative Density: 1.8–2.5 (varies with composition)
Solubility: Sparingly soluble in water, soluble in alcohols
Partition Coefficient (n-octanol/water): Not established
Auto-ignition Temperature: Not self-igniting
Decomposition Temperature: >200°C
Viscosity: Not applicable (solid)
Chemical Stability: Stable under recommended handling and storage conditions with minimal exposure to moisture and air
Reactivity: Reacts with strong reducing agents, acids, strong bases, oxidizers, some metals
Hazardous Decomposition Products: Hydrogen chloride, perfluorinated organics, chromium oxides, sulfur oxides, chloro compounds, carbon oxides
Conditions to Avoid: Heat, flames, strong UV, acids/bases, incompatible chemicals, excessive moisture
Polymerization: Not expected under normal handling and storage
Likely Routes of Exposure: Inhalation, skin contact, ingestion, eye contact
Acute Effects: Irritation to mucous membranes, upper respiratory tract, skin, eyes, gastrointestinal distress on ingestion
Chronic Effects: Sensitization, risk of carcinogenicity from chromium content, persistent cough, dermatitis, possible organ effects (lungs, liver, kidneys) with repeated exposure
Toxicity Data: No reliable animal LD50 available for compound, chromium hexavalent forms LD50 oral rat at 52 mg/kg, isopropanol 5840 mg/kg
Carcinogenicity: Chromium compounds (especially hexavalent) identified as human carcinogens by IARC and NTP
Mutagenicity: Data for perfluoroalkyl fragments limited, long-chain perfluorinated materials show bioaccumulation
Other Health Effects: Perfluorinated groups may persist in human tissue, cause long-term health impacts
Ecotoxicity: Highly toxic to aquatic life, particularly due to perfluorohexyl and chromium content, long-term effects significant
Persistence and Degradability: Perfluoroalkyl group and chromium not readily biodegradable, persistent in environment
Bioaccumulation Potential: Perfluorinated portions demonstrate high potential to bioaccumulate and magnify in food chains
Mobility in Soil: Moderate to high, particularly perfluoroalkyl groups by leaching
Other Adverse Effects: Significant environmental concerns tied to perfluoroalkyl structures; regulatory bodies are actively reviewing and restricting similar substances due to persistence and toxicity
Disposal Methods: Dispose of according to all federal, state, and local environmental control regulations, classified as hazardous waste due to presence of chromium and perfluorinated chemicals
Contaminated Packaging: Clean and incinerate if regulatory permits, otherwise treat as hazardous chemical waste
Special Precautions: Do not dispose with ordinary trash or allow material to reach sewage/waterways, use licensed hazardous waste contractor
UN Number: Not assigned for mixture, but may fall under UN 3077 for environmentally hazardous substances
UN Proper Shipping Name: Environmentally Hazardous Substance, Solid, N.O.S. (contains chromium and perfluorinated groups)
Transport Hazard Classes: 9 (Miscellaneous dangerous substances and articles)
Packing Group: III
Special Transportation Precautions: Avoid moisture, temperature extremes, follow applicable international, national, and local transport regulations, ensure secure packaging to prevent release, emergency response guide number 171 (Non-flammable, corrosive/abrasive solid)
Marine Pollutant: Yes (by perfluorinated and chromium content)
U.S. Regulations: Subject to OSHA Hazard Communication Standard, CERCLA reportable quantity for chromium, considered toxic chemical under SARA Title III Section 313, likely regulated for perfluoroalkyl substances (TSCA, emerging PFAS rules)
International Regulations: EU REACH registration required for new chemical, listed on restricted substances lists in some jurisdictions due to perfluorinated groups, restricted under Stockholm Convention for related substances
Labeling Requirements: Hazard symbols for carcinogen, aquatic toxicity, irritant, proper hazard and precaution statements in language(s) of country of operation
Other Regulatory Info: Chromium compounds and perfluorinated materials face increased regulatory scrutiny in the US, EU, and globally due to toxicity and persistence concerns; workplace controls and consumer use may continue tightening
Providing high-quality chemical products and logistics solutions for global trade partners.
