Product Name: Benzyl alcohol, alpha-(aminomethyl)-3,4-dihydroxy-, (-)-, tartrate (1:1) (salt)
Chemical Formula: C8H11NO2·C4H6O6
Synonyms: No widely recognized synonyms reported
CAS Number: Data should be confirmed according to shipment documentation or laboratory inventory
Recommended Use: Laboratory research, chemical analysis, synthesis applications in pharmaceutical research
Supplier: Manufacturer details and address to be referenced from supplier documentation upon procurement
Emergency Contact: Emergency response numbers appear on product packaging or safety signage at storage location
GHS Classification: Classification may include Skin Irritation, Eye Irritation, Specific Target Organ Toxicity; check product labelling for verification
Signal Word: Warning (based on potential skin and eye irritant properties established in literatures referencing benzyl alcohol derivatives)
Hazard Statements: May cause skin and eye irritation; possible harmful effects if inhaled or swallowed; target organ concerns arise with chronic exposure to precursor compounds
Pictogram: Exclamation mark (irritant symbol), updated pictogram use in line with regional GHS requirements
Precautionary Statements: Avoid direct contact with skin and eyes; wear appropriate personal protective equipment; maintain local ventilation and minimize dust or vapor formation
Chemical Identity: Mixture consists of Benzyl alcohol, alpha-(aminomethyl)-3,4-dihydroxy-, (-)- and L-(+)-tartaric acid in a 1:1 molar ratio
Purity: Research-grade preparations typically exceed 97% purity as analyzed by HPLC or NMR
Impurities: Trace solvent, water (<1%), minimal ester byproducts under controlled synthesis; batch-specific COA details provide precise breakdown
Formulation: Solid crystalline salt or fine powder, depending on supplier; avoid inhalation during weighing and transfer
Inhalation: Move victim to fresh air immediately; monitor for signs of respiratory distress; seek medical advice if symptoms persist
Skin Contact: Remove contaminated clothing; wash affected area with soap and water for several minutes; seek assistance if irritation continues
Eye Contact: Rinse cautiously with water for at least 15 minutes; remove contact lenses if easy to do; obtain medical attention if redness or discomfort persists
Ingestion: Rinse mouth thoroughly; do not induce vomiting; consult a physician or call poison control promptly
Suitable Extinguishing Media: Use CO2, dry chemical powder, or alcohol-resistant foam in case of fire; water spray can cool exposed containers and decrease thermal risks
Specific Hazards Arising from Chemical: Combustion may produce fumes containing CO, CO2, and nitrogen oxides; tartrate salts may generate additional acidic smoke
Protective Equipment: Firefighters should wear full-body gear including NIOSH-approved self-contained breathing apparatus to prevent inhalation of toxic byproducts
Personal Precautions: Restrict area access to trained personnel; don chemical-resistant gloves, goggles, and a dust mask or appropriate respirator
Environmental Precautions: Prevent chemical from entering drains or waterways; use containment measures such as absorbent pads or dikes
Cleanup Methods: Collect spilled material using non-sparking tools; place in secure, labeled waste containers; ventilate area and wash spill site with water and detergent
Handling: Carry out weighing and transfers in a fume hood or well-ventilated workspace; avoid inhaling dust or vapors; always ground containers and use anti-static measures
Storage: Store in tightly sealed containers; cool, dry, and well-ventilated environments suit long-term storage needs; keep away from strong oxidizers, acids, and bases; shelf-life best maintained by limiting exposure to light and humid conditions
Engineering Controls: Use fume hood for powder handling; local exhaust ventilation supports safer air quality
Personal Protective Equipment: Nitrile or neoprene laboratory gloves, safety goggles, lab coat with long sleeves, and closed shoes form base protection; for bulk operations, supplement with respirators meeting suitable filtration standards
Exposure Limits: No established OSHA or ACGIH workplace exposure limits as of latest update; maintain good laboratory practices to minimize exposure
Hygiene Measures: Wash hands before eating or handling personal items; avoid touching face or exposed skin after material handling
Appearance: White or off-white crystalline powder or solid; free-flowing with no pronounced odor
Molecular Weight: Approximately 305 g/mol (salt form)
Melting Point: Estimated range 120–150°C, may vary with hydration or form
Solubility: Readily soluble in water, moderate solubility in polar organic solvents
pH (aqueous): Near neutral to slightly acidic; prepared solutions may range from pH 4 to 7 depending on concentration
Vapor Pressure: Negligible under standard laboratory conditions
Partition Coefficient: Data unavailable for this specific compound; consult similar benzyl alcohol salt derivatives for approximate values
Chemical Stability: Stable under ambient laboratory storage; long-term exposure to moisture or strong light may promote degradation
Reactivity: May react with strong oxidizers, strong acids, or alkali; avoid high-energy mixing with incompatible materials to prevent hazardous decomposition
Hazardous Decomposition Products: Thermal decomposition produces CO, CO2, nitrogen oxides, and possibly small molecules from tartrate breakdown
Routes of Exposure: Inhalation, accidental ingestion, skin and eye contact
Acute Toxicity: Data limited for this salt form; reference benzyl alcohol data indicating moderate toxicity (oral LD50 rat 1230 mg/kg)
Chronic Effects: Repeated exposure may sensitize skin, irritate mucous membranes, or disrupt nervous system in animal models; not considered a known carcinogen
Irritation / Sensitization: Can produce mild to moderate skin and eye irritation; appropriate PPE reduces risk
Other Effects: Persons with pre-existing allergies or respiratory conditions may be more sensitive to chemical exposure
Ecotoxicity: Harm to aquatic organisms possible if released untreated; data on salt form is sparse, but base components show moderate aquatic toxicity
Persistence and Degradability: Base molecules break down over days to weeks; tartrate and benzyl groups degrade readily in biologically active wastewater systems
Bioaccumulation: Not expected to bioaccumulate in higher organisms; water-solubility supports dispersal and eventual breakdown
Mobility in Soil: High mobility due to water solubility, potential for leaching if spilled in large quantities
Waste Handling: Do not dispose of material down the drain or general waste bins without assessment; place in marked hazardous waste container for chemical incineration or certified treatment
Contaminated Packaging: Rinse containers thoroughly before disposal; dispose of rinsate and container in accordance with regional hazardous waste guidelines
Legal Compliance: Reference national and local regulations for hazardous waste, including Resource Conservation and Recovery Act (RCRA) in the US if applicable
UN Number: Not regulated as a dangerous good for most forms at bench scale; verify with most recent DOT, IATA, and IMDG listings
Shipping Name: Research chemical, not otherwise specified
Hazard Class: Not classified as hazardous for transportation below threshold quantities; larger bulk shipments may require evaluation by shipper or carrier
Packing Group: Not assigned for laboratory quantities, review SDS and consignment paperwork for exceptions
Environmental Hazards: Not considered marine pollutant for small-scale parcels; minimize risk through secure packaging and secondary containment
OSHA: Not specifically listed; general chemical hygiene applies
TSCA (US): Verify inclusion or exemption with customer service or manufacturer
EU REACH: Data registration and compliance may be required for manufacture/import over one ton per year; check confirmation documents as supplied
WHMIS (Canada): Generic laboratory chemical; observe laboratory substances protocols
Other Local Regulations: Adhere to workplace chemical safety training, maintain updated Safety Data Sheets with inventory, and participate in periodic hazard review or audit programs as required by institutional policy or national guidelines
Providing high-quality chemical products and logistics solutions for global trade partners.
