Product Name: BAP-L-Tartrate
Chemical Family: Organic tartrate compound
Use: Research, chemical synthesis
Supplier: Name, address, and contact details should be listed here according to supply chain requirements
Emergency Contact: Local poison control center or medical emergency hotline
Classification: Not classified as hazardous under GHS for most laboratory uses, but may cause eye or skin irritation on contact.
Physical Hazards: Not flammable or explosive, but generate dust during handling.
Health Hazards: Inhalation of dust may irritate nose, throat, or lungs. Contact with eyes or skin may cause irritation, redness, or discomfort. Ingestion may result in gastrointestinal upset or abdominal discomfort.
Label Elements: May include exclamation mark pictogram for irritant. Signal word: Warning. Hazard statements refer to eye and skin irritation.
Chemical Name: BAP-L-Tartrate
Synonyms: BAP Tartrate salt, 6-Benzylaminopurine tartrate form
CAS Number: List specific identifier if known
Concentration: Pure substance or mixture as detailed by supplier grades
Impurities: Trace residual solvents or synthesis by-products may appear in lab-scale material, typically below 0.5%
Inhalation: Remove to fresh air. Seek medical attention if symptoms persist such as coughing or respiratory distress.
Skin Contact: Wash gently with soap and water for at least 15 minutes. Remove contaminated clothing and wash before reuse.
Eye Contact: Rinse with gentle flow of water for several minutes, holding eyelids apart. Seek eye specialist attention if irritation continues.
Ingestion: Rinse mouth with clean water. Do not induce vomiting unless instructed by medical personnel. Contact poison control or emergency medical help immediately.
Suitable Extinguishing Media: Use dry chemical, foam, carbon dioxide, or water spray.
Unsuitable Extinguishing Media: Direct water jet may disperse dust.
Specific Hazards: Product does not ignite easily but may generate toxic fumes in fire—carbon oxides, nitrogen oxides, and ammonia may evolve.
Protective Equipment: Firefighters must use self-contained breathing apparatus and full protective clothing to avoid inhalation of decomposition products.
Additional Advice: Move containers away from fire if safe. Prevent runoff to sewers or waterways.
Spill Response: Avoid creating dust. Sweep up with non-sparking tools or use a dust-free vacuum with HEPA filter.
Personal Precautions: Wear gloves, goggles, lab coat, and particulate mask.
Environmental Precautions: Do not flush into streams, drains, or soil. Prevent further leakage or spillage if safe to do so.
Cleaning Up: Place collected product in clean, labeled tamper-proof containers for disposal, following waste regulations. Ventilate affected area thorough
Handling: Use in a well-ventilated area, or fume hood when handling powders. Minimize generation of dust. Use appropriate PPE.
Hygiene Measures: Wash hands, forearms, and face after handling. Do not eat, drink, or smoke in areas where materials are handled.
Storage Conditions: Store in a tightly closed container, in a cool, dry, and well-ventilated place away from direct sunlight and incompatible substances.
Incompatibilities: Store away from oxidizing agents and acids. Avoid contact with strong bases or reactive chemicals which may decompose tartrate salts.
Occupational Exposure Limits: No specific occupational exposure limits are established for BAP-L-Tartrate. Use general exposure limit for nuisance dust—10 mg/m3 (total inhalable), 3 mg/m3 (respirable) as recommended by ACGIH.
Engineering Controls: Use laboratory fume hood, dust extraction, or local exhaust ventilation to control airborne concentrations.
Individual Protection: Gloves made of nitrile or PVC, lab coat, safety goggles or glasses with side protection, and disposable particulate mask (P2 or higher), depending on likelihood of dust formation.
Environmental Protection: Avoid emissions into the environment. Collect waste in designated, leakproof containers for proper disposal.
Appearance: White to off-white crystalline or powdered solid
Odor: Odorless or faint organic odor
pH (1% solution): Approximately 4.0–6.5
Melting Point: Decomposes above 180°C, exact melting point may depend on hydrate
Boiling Point: Not applicable, decomposes before boiling
Solubility: Freely soluble in water, sparingly soluble in ethanol and other polar solvents
Density: Typically ranges from 1.3–1.5 g/cm3
Vapor Pressure: Not relevant for the solid form
Molecular Weight: Approximately 376 g/mol (depends on degree of hydration)
Chemical Stability: Stable at recommended storage conditions, very slow decomposition under normal laboratory use.
Reactivity: Unreactive under ambient conditions. Possible acid-sensitive under strong acidic conditions, but lab concentrations rarely reach this range.
Hazardous Decomposition Products: Heating to decomposition releases oxides of carbon and nitrogen, ammonia, and tartrate byproducts.
Incompatible Materials: Strong oxidizing agents, strong acids or bases.
Polymerization: Not expected to occur.
Acute Toxicity: Oral rat LD50 value for similar compounds >2000 mg/kg body weight, low acute health hazard expected at typical exposure levels.
Skin Corrosion/Irritation: May cause irritation with prolonged or repeated contact.
Serious Eye Damage/Irritation: Direct contact may trigger redness, watering.
Respiratory Sensitization: Dust can cause irritation or cough in sensitive users.
Carcinogenicity: Not listed as carcinogenic under IARC, NTP, or OSHA.
Mutagenicity: No data supporting genotoxicity under normal handling.
Other Chronic Effects: Limited evidence for effects due to low systemic absorption.
Toxicity: No harsh aquatic toxicity data available; structurally similar compounds show low risk to aquatic life at typical concentrations.
Persistence and Degradability: Likely biodegradable in natural environments, as tartrate salts break down gradually via microbial action.
Bioaccumulative Potential: Low likelihood for bioaccumulation given moderate water solubility and metabolism in soil.
Mobility in Soil: Moderately mobile, but binds readily to organic matter. Transport through groundwater unlikely in most settings.
Other Adverse Effects: Prevent large concentrations from entering waterways to reduce localized eutrophication or chemical stress.
Disposal Methods: Contaminated material, waste, or expired product must be disposed according to local or regional waste regulations. Incineration at approved chemical waste facility can be an option.
Unclean Packaging: Wash and recycle if possible, or dispose as hazardous laboratory chemical waste.
Special Precautions: Avoid dispersal into environment. Label waste clearly with chemical identity and date collected.
UN Number: Not regulated for transport internationally by road, air, or sea.
Proper Shipping Name: Lab chemical, not otherwise specified.
Transport Hazard Class: Not classified as dangerous for transport.
Packing Group: Not assigned.
Special Procedures: Transport in sealed, labeled containers to prevent spillage or accidental contamination. Keep upright and secured during transit.
US-OSHA: Not classed as hazardous according to US OSHA Hazard Communication Standard (29 CFR 1910.1200).
EU-REACH: Not listed for registration or restriction under European REACH Regulation.
Other Country Restrictions: Check specific country or regional chemical inventories for updated status.
Labelling Requirements: Safety data sheets and proper hazard signage recommended at point of use and storage.
Workplace Controls: Institutions should maintain training, risk assessments, and availability of eyewash/showers per chemical safety programs.
GHS Classification: Complies with globally harmonized system where applicable for laboratory chemical safety.
Providing high-quality chemical products and logistics solutions for global trade partners.
