Product Name: alpha,alpha-Diphenyl-1-piperidinepropanol hydrochloride
Chemical Formula: C20H25NO•HCl
Synonyms: 1-Piperidinepropanol, alpha,alpha-diphenyl-, hydrochloride
CAS Number: 14395-75-6
Recommended Use: Laboratory chemicals, research and development
Supplier: Registered chemical supplier information follows local regulations and quality compliance
Emergency Phone Numbers: Poison control centers or national emergency contact for chemical exposure
Classification: Acute Toxicity (Oral, Dermal), Irritation to Eyes and Skin
Signal Word: Warning
Hazard Pictograms: Exclamation Mark and Health Hazard
Hazard Statements: Harmful if swallowed, harmful in contact with skin, causes skin irritation, causes serious eye irritation, may cause respiratory irritation if mist or dust is inhaled
Precautionary Statements: Avoid breathing dust or vapors, wash hands after handling, use only outdoors or in well-ventilated area, wear protective clothing, gloves, and eye/face protection, store locked up, dispose of contents by local, state, and federal regulations
Chemical Name: alpha,alpha-Diphenyl-1-piperidinepropanol hydrochloride
Common Name: No common commercial name available
CAS Number: 14395-75-6
Concentration: 95-100% purity as supplied
Impurities: May contain trace related organic substances depending on synthesis route
Other Components: No stabilizing additives listed, pure form as typical for laboratory reagents
Eye Contact: Rinse immediately with plenty of water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Seek medical attention for persistent irritation.
Skin Contact: Remove contaminated clothing and wash skin with mild soap and water. If irritation continues, get medical help.
Inhalation: Move affected person to fresh air. If not breathing, give artificial respiration. Seek emergency medical care.
Ingestion: Rinse mouth with water and never induce vomiting. Call a poison center or physician. Do not give anything by mouth to an unconscious person.
Self-protection for First Aid Responders: Use gloves, goggles, and if available, a dust mask. Avoid direct exposure.
Suitable Extinguishing Media: Use CO2, dry chemical, foam, or water spray. Avoid direct water jets.
Specific Hazards from Combustion: Thermal decomposition produces hazardous gases such as hydrogen chloride, nitrogen oxides, and carbon monoxide, which pose inhalation risks.
Protective Equipment for Firefighters: Wear full protective clothing and self-contained breathing apparatus.
Precautions: Fight fire from a safe distance or protected location, cool exposed containers with water mist, keep unnecessary personnel away
Spill Response: Isolate the area and ensure proper ventilation. Avoid dust formation. Wear gloves, protective eyewear, and a lab coat. Collect spilled material with a suitable absorbent (such as inert dry sand) and transfer to a chemical waste container.
Environmental Precautions: Prevent release into sewers, surface water, or soil. Notify relevant authorities if chemical enters the environment.
Cleaning Method: After removal, wipe the contaminated area with water and mild detergent. Dispose of waste safely.
Handling: Handle only in a chemical fume hood or well-ventilated area. Avoid breathing dust and avoid contact with skin, eyes, and clothing. Do not eat, drink, or smoke when handling.
Storage: Store in a tightly closed, labeled container in a cool, dry, and well-ventilated place away from incompatible substances such as oxidizers and acids. Protect from light and moisture. Maintain temperature stability between 15°C and 25°C. Keep out of reach of children and unauthorized personnel.
Exposure Limits: No established exposure limits for this specific compound. Minimize exposure as a precaution.
Engineering Controls: Use local exhaust ventilation, chemical fume hood, or other engineering controls to reduce airborne concentrations.
Personal Protective Equipment: Wear laboratory nitrile gloves, tightly fitting safety goggles, lab coat, and, if necessary, a properly fitted respirator.
General Hygiene Measures: Always wash hands after handling. Remove and wash contaminated clothing before reuse.
Appearance: White to off-white crystalline powder
Odor: Odorless or mild amine-like odor
pH: Not available in dilute aqueous solution
Melting Point: About 169°C (decomposition possible at higher temperatures)
Boiling Point: Not applicable (decomposes before boiling)
Flash Point: Data not available
Solubility: Freely soluble in water and ethanol
Vapor Pressure: Negligible at room temperature
Density: Data not available; estimated based on component structure
Partition Coefficient (Log Kow): Not determined
Chemical Stability: Stable under normal conditions of storage and handling
Possibility of Hazardous Reactions: No dangerous reactions reported under normal use; avoid strong acids, bases, and oxidizing agents
Conditions to Avoid: Exposure to moisture, heat, strong sunlight, and open flames
Incompatible Materials: Strong oxidizers, strong acids, and bases
Hazardous Decomposition Products: Thermal breakdown releases hydrogen chloride, carbon monoxide, carbon dioxide, nitrogen oxides
Routes of Exposure: Inhalation, ingestion, skin, and eye contact
Acute Effects: Ingestion or skin absorption causes nausea, headache, dizziness, skin and eye irritation
Chronic Effects: Prolonged or repeated exposure may cause dermatitis or aggravate pre-existing skin conditions
Acute Toxicity: No comprehensive toxicological data available; structurally related compounds show low to moderate oral toxicity in rodents
Carcinogenicity: No data indicating carcinogenic potential
Mutagenicity and Reproductive Toxicity: Data not available
Ecotoxicity: Data not available for aquatic or terrestrial environments, but structurally similar compounds may cause mild, localized toxicity
Persistence and Degradability: Not rapidly biodegradable; disposal must consider possible persistence in the environment
Bioaccumulation: No evidence of significant bioaccumulation
Mobility in Soil: Likely limited mobility due to salt form; depends on environmental conditions
Other Adverse Effects: Avoid release to environment to prevent possible long-term effects
Safe Disposal Methods: Collect and place in a suitable, labeled waste container. Dispose of through a licensed chemical waste disposal contractor.
Contaminated Packaging: Empty containers must be tripled rinsed and handled as chemical waste.
Legal Requirements: Follow all federal, state, and local environmental regulations governing disposal of chemical substances.
Best Practices: Never dispose through drains or regular waste streams
UN Number: Not classified as dangerous goods by transport regulations due to low volume quantities commonly shipped for research
Proper Shipping Name: Laboratory chemical, non-regulated
Transport Hazard Class: Not regulated
Packing Group: Not regulated
Special Precautions for Transport: Handle in original packaging. Avoid extreme temperatures, rough handling, or mechanical shock to container.
OSHA (Occupational Safety and Health Administration): No specific listing, handle as laboratory chemical
TSCA (Toxic Substances Control Act): Not listed for commercial manufacture or import
SARA (Superfund Amendments and Reauthorization Act): No components listed under SARA 302, 304, or 313
California Proposition 65: Not listed as carcinogen or reproductive toxin
EU Classification: Not classified under EU CLP regulation; local national regulations apply
Inventory Status: Check local chemical inventory listings for compliance before import, export, or distribution
Providing high-quality chemical products and logistics solutions for global trade partners.
