Material Safety Data Sheet: 2-{3-(S)-[3-[2-(7-Chloroquinolinyl)-ethenyl]-phenyl]-3-hydroxypropyl}-benzene-2-propanol

1. Identification

Product Name: 2-{3-(S)-[3-[2-(7-Chloroquinolinyl)-ethenyl]-phenyl]-3-hydroxypropyl}-benzene-2-propanol
Synonyms: Not widely available
CAS Number: Not formally assigned
Recommended Use: Research, analytical chemistry, pharmaceutical intermediate
Manufacturer: Request information from supplier or laboratory
Emergency Contact: Refer to facility procedures or contact local health and safety authorities

2. Hazard Identification

Classification: No GHS classification completed for this novel compound; absence of broad-scale data, but quinoline derivatives often present health hazards
Signal Word: Warning
Hazard Statements: May damage organs through prolonged or repeated exposure, can irritate eyes and skin, possible acute toxicity if ingested, suspected of being a reproductive hazard due to quinoline substructure
Pictograms: Health Hazard, Exclamation Mark
Precautionary Statements: Avoid breathing dust or fumes, prevent contact with skin and eyes, wash hands after handling, do not eat or drink when using

3. Composition / Information on Ingredients

Chemical Identity: 2-{3-(S)-[3-[2-(7-Chloroquinolinyl)-ethenyl]-phenyl]-3-hydroxypropyl}-benzene-2-propanol
Concentration: Typically provided in pure form or as a research-grade solution
Impurities: Trace solvents, unreacted intermediates may be present
Additives: None reported; formulation specific

4. First Aid Measures

Inhalation: Move individual to fresh air, monitor for respiratory distress, seek medical attention for persistent symptoms
Skin Contact: Remove contaminated clothing, wash affected area with soap and plenty of water, consult medical staff for irritation or persistent redness
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses if present, continue rinsing, acquire ophthalmological guidance if irritation persists
Ingestion: Rinse mouth with water, do not induce vomiting, prompt medical attention needed, provide material data for reference

5. Fire-Fighting Measures

Suitable Extinguishing Media: Water spray, dry chemical powder, foam, carbon dioxide (CO2)
Hazards from Combustion: Irritating, toxic fumes (hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide) likely released
Protective Equipment: Self-contained breathing apparatus, chemical-resistant garments
Advice for Firefighters: Isolate area, use water spray to cool containers, prevent runoff from reaching waterways; avoid inhaling combustion gases

6. Accidental Release Measures

Personal Precautions: Don protective gloves, impervious clothing, and suitable respiratory protection, ventilate affected area
Environmental Precautions: Prevent leakage into drains, surface waters, and soil, alert environmental authorities in case of widespread release
Cleanup Methods: Collect spilled solid material with non-combustible absorbent (sand, earth, vermiculite), seal in labeled containers, ventilate area, decontaminate with detergent solution, dispose in accordance with local regulations

7. Handling and Storage

Handling: Only trained personnel should handle; minimize dust generation, work in fume hood, avoid direct exposure, avoid incompatible chemicals
Storage: Store in tightly closed containers, cool, dry, well-ventilated location, segregate from oxidizers and acids, prevent moisture exposure, clearly label storage area; refrigerate if stability data supports it

8. Exposure Controls and Personal Protection

Engineering Controls: Fume hood, mechanical exhaust ventilation, spill containment
Personal Protective Equipment: Lab coat, safety goggles, chemical resistant gloves (nitrile, neoprene), respirator if ventilation inadequate
Hygiene Measures: Wash hands and forearms thoroughly after handling, remove and launder contaminated clothing before reuse, prohibit food and drink in work area
Control Parameters: No established occupational exposure limits, handle as potentially hazardous material

9. Physical and Chemical Properties

Appearance: Solid or crystalline powder, color may range from off-white to pale yellow
Odor: Faint characteristic / chemical-type odor
pH: Not determined (insoluble in water)
Melting Point / Freezing Point: Estimated, refer to supplier
Boiling Point: Decomposes before boiling
Flash Point: Not determined, potentially combustible
Solubility: Poorly soluble in water; soluble in organic solvents such as DMSO, DMF, chloroform
Vapor Pressure: Not measured
Relative Density: Refer to laboratory data
Partition Coefficient: Not available, high for lipophilic base
Auto-ignition Temperature: Not established

10. Stability and Reactivity

Chemical Stability: Stable under normal laboratory conditions, avoid high temperatures and moisture
Reactivity: May react with strong acids or oxidizing agents, incompatible with reducing agents
Decomposition Products: Hydrogen chloride, nitrogen oxides, unknown organics possibly released by heating or burning
Conditions to Avoid: Humidity, heat, light exposure, open flames

11. Toxicological Information

Acute Toxicity: Effects not fully studied, anticipated oral and dermal toxicity, possible risk for headaches, nausea, dizziness, respiratory irritation based on quinoline backbone
Skin / Eye Irritation: Skin may redden, eyes may sting and water
Respiratory Sensitization: Inhalation can provoke coughing, shortness of breath, possible chemical bronchitis
Long-Term Effects: No definitive data, some quinoline derivatives linked to liver or kidney issues and neurotoxicity after chronic exposure
Carcinogenicity: Not conclusively classified, quinoline analogues sometimes under suspicion
Mutagenicity / Reproductive Toxicity: Experimental evidence with related compounds points toward potential mutagenicity, handle with caution

12. Ecological Information

Ecotoxicity: Known persistence for quinoline-based molecules in the environment, risk to aquatic organisms likely
Persistence and Degradability: Poor degradation in soil and water expected, chemical stable structure
Bioaccumulation Potential: Possible bioaccumulation risk due to lipophilicity
Mobility in Soil: Limited by low solubility, slow leaching
Other Harmful Effects: Take measures to prevent environmental release, inform authorities if large amounts enter waterways or sewers

13. Disposal Considerations

Waste Disposal Methods: Submit to authorized chemical waste facility, incineration under controlled conditions preferred, avoid landfill, triple rinse empty containers before disposal
Hazardous Waste Codes: Not assigned, treat as organic hazardous waste
Contaminated Packaging: Dispose as hazardous chemical waste, do not reuse containers

14. Transport Information

UN Number: Not officially assigned, package and transport as potentially hazardous substance
UN Proper Shipping Name: Laboratory chemical, n.o.s. (not otherwise specified)
Transport Hazard Class: Not classified, use chemical shipping standards
Packing Group: Not established, seek expert consultation
Special Precautions: Protect from mechanical damage, temperature extremes, direct sunlight; present SDS to transport personnel

15. Regulatory Information

OSHA Hazard Communication: No data, handle as laboratory chemical with limited regulatory precedent
SARA/Title III: Not listed
REACH Registration Status: Most likely not registered
TSCA Status: Not listed
Other State / National Regulations: Consult local, state, and national regulations applicable to possession and use of novel chemical compounds, report incidents as required