Product Name: 2-(2-(3-(2-(7-Chloro-2-quinolinyl)-ethenylphenyl)-3-hydroxypropyl)phenyl)-2-propanol
Chemical Formula: C26H24ClNO2
Synonyms: Not commonly known under alternative names
Recommended Use: Research, analytical study, pharmaceutical or chemical research applications
Manufacturer Information: Manufacturer name, address, and emergency contact number specific to source
Emergency Contact: Emergency phone available through national poison centers and manufacturer’s safety division
UN Number: To be assigned by relevant transportation authority based on country and region
Hazard Classification: Acute oral and inhalation toxicity, specific target organ toxicity, possible skin irritation
Label Elements: Pictograms for skin and eye irritation, respiratory hazard, and general toxic substance
Signal Word: Warning
Hazard Statements: Causes skin and eye irritation; toxic if swallowed or inhaled; may cause damage to organs through prolonged exposure; environmental hazards for aquatic life
Precautionary Statements: Avoid breathing dust; prevent release to environment; wear protective clothing/gloves/eye protection; wash thoroughly after handling
Hazard Symbol Codes: GHS07 (exclamation mark), GHS06 (skull and crossbones), GHS08 (health hazard)
Potential Health Effects: Shortness of breath, headache, nausea, potential allergic skin reaction, conjunctivitis
Chemical Identity: 2-(2-(3-(2-(7-Chloro-2-quinolinyl)-ethenylphenyl)-3-hydroxypropyl)phenyl)-2-propanol
CAS Number: Needs to be identified based on database registration
Impurities/Additives: Typically contains less than 1% of unreacted starting materials and possible solvents like dimethyl sulfoxide (DMSO)
Concentration: Material typically supplied in pure form, concentration ranging from 95-99.8% by weight
Relevant Allergens: Structural similarity to related quinoline or phenyl compounds might trigger sensitization in susceptible individuals
Eye Contact: Immediately flush with plenty of water for at least 15 minutes, holding eyelids apart; seek medical attention if irritation develops or persists
Skin Contact: Wash exposed area thoroughly with soap and water while removing any contaminated clothing; seek attention for persistent rash or irritation
Ingestion: Rinse mouth with water (unless victim is unconscious); do not induce vomiting; get medical assistance without delay
Inhalation: Remove to fresh air promptly; administer oxygen if breathing becomes labored; monitor for respiratory distress and consult emergency medical services
Note to Physician: Provide symptomatic treatment and monitor for delayed systemic effects; consider potential quinoline toxicity, organ involvement
Suitable Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide; avoid direct stream as chemical may be dispersed
Unsuitable Extinguishing Media: Avoid uncontrollable water jet
Specific Hazards: Combustion may produce irritating or toxic fumes, such as nitrogen oxides, hydrogen chloride, carbon monoxide, carbon dioxide; quinoline derivatives can release hazardous gases
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear to avoid skin contact
Special Precautions: Fight fire from upwind position; prevent fire run-off from contaminating water systems
Explosion Sensitivity: Not known to be particularly sensitive, but dust clouds or fine powders can pose risk in confined areas
Personal Precautions: Evacuate unprotected personnel from area; ventilate enclosed spaces; prevent inhalation and skin/eye contact
Protective Equipment: Wear protective gloves, chemical goggles, lab coat, and respiratory mask
Spill Response: Absorb material with inert substance (e.g., sand, vermiculite); avoid raising dust; sweep up and place in suitable container for disposal; clean surface thoroughly with detergent and water
Environmental Precautions: Prevent entry to drains, sewers, or waterways; contain spill with booms/barriers if large quantity released
Decontamination Procedures: Wash residual material with copious amounts of water; dispose as hazardous waste
Handling: Use in well-ventilated area, preferably under fume hood; avoid inhaling dust, vapors, or mist; wear proper personal protective equipment; thoroughly wash hands and exposed skin after handling; keep away from incompatible substances such as strong oxidizers and acids
Storage: Store tightly closed in original container, in a cool, dry, well-ventilated place; protect from light and moisture; secure access to authorized personnel only; avoid proximity to heat sources or ignition points
Incompatibilities: Strong acids, bases, oxidizing agents; may react violently or degrade under unsuitable storage
Packaging: Prefer sealed amber glass or chemical-resistant container; secondary containment required for bulk quantities
Occupational Exposure Limits: No established exposure limits for this compound; apply general dust, quinoline, or organic vapor guidelines
Engineering Controls: Chemical fume hood, adequate laboratory ventilation, explosion-proof equipment for volatile organic compounds
Respiratory Protection: Use NIOSH-approved particulate respirator for dusts or half-mask respirator for vapors; apply when ventilation insufficient or exposure potential identified
Eye Protection: Chemical safety goggles or face shield if splash risk exists
Skin Protection: Nitrile or neoprene gloves, lab apron or chemical-resistant clothing; avoid open shoes and short sleeves
Hygiene Practices: Do not eat, drink, or smoke in handling areas; wash hands thoroughly after use and before breaks
Appearance: Off-white to light yellow crystalline powder
Odor: Faint aromatic, possibly chloroquinoline-like scent
Odor Threshold: Data not determined
pH: Not applicable in solid form; weakly basic in solution
Melting Point/Freezing Point: Estimated between 160–210°C (decomposition possible above 190°C)
Boiling Point: Data not established due to complex structure and likely decomposition
Flash Point: Greater than 100°C (unknown precise value)
Evaporation Rate: Non-volatile in solid state
Flammability: Not classified as highly flammable; powder airborne can combust
Vapor Pressure: Considered negligible at room temperature
Vapor Density: Not established
Relative Density: Estimated 1.2–1.4 g/cm³
Solubility: Low in water; moderate in DMSO, ethanol, methanol, acetone
Partition Coefficient (log Pow): High due to aromatic and quinoline groups, likely 3–5
Auto-ignition Temperature: Data not available
Decomposition Temperature: Above 200°C
Viscosity: Not applicable (solid)
Chemical Stability: Stable under recommended handling and storage conditions; susceptible to hydrolytic or oxidative breakdown over time or excessive heat
Reactivity: Can react with strong acids, bases, oxidizing agents; quinoline core can undergo ring-opening in harsh environments
Possibility of Hazardous Reactions: No polymerization expected; hazardous byproducts may form upon combustion or mixing with incompatible substances
Hazardous Decomposition Products: Release of toxic gases like CO, NOx, HCl upon decomposition
Conditions to Avoid: Prolonged exposure to heat, humidity, strong UV light, open flame
Acute Toxicity: Experimental data on oral and dermal toxicity not fully available; modeling by structure indicates moderate to high toxicity if swallowed (LD50 estimate 100–500 mg/kg oral rat)
Skin Corrosion/Irritation: May cause irritation through repeated or prolonged contact, redness, itching, swelling
Serious Eye Damage/Irritation: Direct exposure can result in pain, redness, watering, temporary visual disturbance
Respiratory Sensitization: Inhalation of powder/dust can cause throat irritation, coughing, labored breathing; sensitivity may develop on chronic exposure
Skin Sensitization: Structural similarity to some known quinoline allergens; users with skin disorders face higher risk
Carcinogenicity: Data insufficient for classification; no IARC or ACGIH designation; structural groups suggest monitoring for chronic organ effects
Mutagenicity: No direct evidence; related quinolines show some genotoxic potential
Reproductive Toxicity: No published animal or human data; handle with precaution
Specific Target Organ Toxicity: May impact liver or kidneys through prolonged exposure to related compounds
Ecotoxicity: Persistent and potentially toxic to aquatic life; quinoline compounds disrupt aquatic metabolism, growth, and reproduction
Persistence and Degradability: Likely not readily biodegradable; stable aromatic and heterocyclic systems resist fast degradation
Bioaccumulative Potential: Significant due to lipophilic aromatic structure; probable accumulation in aquatic organisms’ tissues
Mobility in Soil: Low, with higher persistence in sediment and organic-rich soils; moderate binding to clay and silt
Other Adverse Effects: Degradation products may present greater toxicity or mobility; risk of bio-concentration up food chain
Waste Treatment Methods: Collect and contain residues in sealed, properly labeled containers
Disposal of Product: Incinerate in permitted chemical waste facility, observing all local and federal environmental regulations; avoid landfill disposal
Contaminated Packaging: Dispose of containers as hazardous waste; triple rinse before disposal or recycling if allowable
Precautions: Prevent exposure of waste to water sources; avoid dispersing dust and take steps to prevent accidental exposure
Regulatory Status: Follow regional regulations specific to hazardous chemical waste, including export/import restrictions and special permits
UN Number: Assignment pending, suggest classification similar to toxic solid organic compounds
UN Proper Shipping Name: Toxic solid, organic, n.o.s. (based on primary chemical hazard class)
Transport Hazard Class: Class 6.1 (toxic substance)
Packing Group: III (medium hazard level expected for moderate toxicity)
Environmental Hazards: Marine pollutant. Take special care to prevent accidental release during handling or transportation
Special Precautions: Mark with specific hazard label, include emergency response guide in shipping documentation; avoid concurrent transport with incompatible substances
Additional Transport Details: Require secondary containment and secure, weatherproof packaging for land, air, or sea
OSHA Status: Not specifically listed; general chemical hygiene and exposure limits apply
TSCA Inventory: Not currently registered; import/export controls likely (consult most recent inventory for updates)
EPCRA/SARA Title III: Not classified as extremely hazardous, but reportable under accidental release for toxic substances
REACH Compliance: Obligations for import and use in the EU; registration and notification may be required
Other National/Regional Regulations: Conform to local chemical safety and transport statutes
Labeling Requirements: GHS-aligned hazard and precautionary labeling, including pictograms, risk phrases, and first aid sections
Inventory Status: Refer to national, regional, and international inventories for up-to-date status
Providing high-quality chemical products and logistics solutions for global trade partners.
