Product Name: 2 2'-((2-Chloro-5-cyano-1 3-phenylene)diimino)bis(2-oxoacetic acid) compd. with 2-amino-2-(hydroxymethyl)-1 3-propanediol (1:2)
Synonyms: No common synonyms established in the industry
Recommended Use: Used as an intermediate in chemical synthesis, laboratory reagent
Manufacturer: Industrial chemical manufacturers and research chemical suppliers
Contact Information: Emergency phone numbers, physical addresses, email contacts to be checked on the original label or regulatory filings for your region
CAS Number: Specific CAS registration required for each constituent, consult with chemical registry databases
Product Code: Refer to supplier documentation or designated batch label
Emergency Overview: Non-volatile solid, may have irritant properties upon contact or inhalation, not intended for consumer use
GHS Classification: Eye irritation, Skin sensitizer, Possible chronic health hazard depending on extended exposure routes
Signal Word: Warning
Hazard Statements: May cause eye and skin irritation. Inhalation exposure can cause respiratory irritation. Not classified for carcinogenicity, but handle with care due to unknown chronic effects.
Precautionary Statements: Avoid breathing dust or fumes, wear suitable protective clothing, use in a ventilated area, wash hands thoroughly after handling
Other Hazards: Solid forms may create dust; sweep or vacuum to avoid inhalation. Always avoid ingestion or prolonged contact; unknown toxicity in high-dose laboratory use.
Pictograms: Exclamation mark for irritation risks as per OSHA/GHS requirements
Chemical Identity: 2 2'-((2-Chloro-5-cyano-1 3-phenylene)diimino)bis(2-oxoacetic acid) (principal), 2-amino-2-(hydroxymethyl)-1 3-propanediol as a 1:2 compound
Concentration: Stoichiometric mixture (typically reported as 33.3% and 66.7% by molar ratio)
CAS Numbers: Individual registration needed for unique compound
Impurities: Residual salts, water, possible unreacted starting materials, trace organic solvents from synthesis
Storage Form: Usually sold as dry powder or crystalline solid, purity >95% as per synthesis
Stabilizing Additives: None reported unless stated by manufacturer
Eye Contact: Rinse eyes cautiously with clean running water for several minutes. Remove contact lenses if present and easy to do without injury. Seek medical help if irritation continues.
Skin Contact: Remove contaminated clothing. Wash affected skin with soap and plenty of water. Consult a health professional if irritation or rash appears.
Inhalation: Remove person to fresh air. Keep comfortable for breathing. If respiratory distress persists, call poison center or medical provider promptly.
Ingestion: Rinse mouth thoroughly with water. Do not induce vomiting. Seek immediate medical advice in case of accidental swallowing.
General Recommendations: Employees should be trained to recognize chemical exposure symptoms and locations of safety showers, eyewash stations, and emergency contact numbers.
Most Important Symptoms: Irritation of eyes, skin, or respiratory tract; in rare cases, may trigger sensitized responses such as rash or coughing.
Notes to Physician: Treat symptomatically. Provide oxygen and symptomatic treatment if inhalation has caused distress; observe for delayed pulmonary symptoms or allergic reactions.
Suitable Extinguishing Media: Carbon dioxide, dry chemical powder, appropriate foam for small fires; do not use water streams directly on burning powder.
Unsuitable Extinguishing Media: Avoid use of high-pressure water jets on dust, which may disperse powder.
Special Hazards: No data on flammability; thermal decomposition may release hazardous nitrogen oxides, hydrogen chloride, carbon monoxide, and small quantities of cyanide compounds.
Protective Equipment: Full protective clothing and self-contained breathing apparatus recommended during major fires.
Advice for Firefighters: Block off area; use caution for possible toxic fume generation; contaminated runoff may require containment
Fire/Explosion Risk: Compound not identified as an explosive under normal conditions, though combustion products may irritate mucous membranes and respiratory tract.
Personal Precautions: Always avoid breathing dust. Ventilate area. Wear gloves, goggles, lab coat, and particulate respiratory protection if large amounts are spilled.
Environmental Precautions: Prevent active entry of dust or solutions into sewers, drains, or open bodies of water. In case of bulk release, inform local environmental authorities following regulations.
Containment and Cleaning: Scoop or vacuum up spilled material carefully to avoid dust formation. Place in properly labeled, tightly closed waste disposal container. Use inert absorbent for mixed slurries if needed.
Decontamination: Wash spill area with copious water and detergent; ventilate room thoroughly.
Disposal of Cleanup Materials: Disposed waste should comply with national and regional hazardous waste handling regulations.
Handling Precautions: Use chemical-resistant gloves, eye protection, and a laboratory coat. Work in a chemical fume hood or well-ventilated area. Avoid inhalation or direct skin contact with powder.
Incompatible Materials: Strong oxidizers, reducing agents, acids, and alkalis. Keep away from moisture, ignition sources, or excessive heat.
Storage Conditions: Store in tightly sealed containers, preferably under inert gas and at controlled room temperature (15–25°C). Protect from light, humidity, and other sources of contamination.
Transfer and Mixing: Use only non-sparking tools and keep containers grounded if transferring large quantities; avoid unnecessary opening of original packaging.
Safety Measures: Inform personnel of risks and post safety signage in relevant storage and usage areas.
Exposure Limits: Not established for this specific compound; handle as an irritant chemical where threshold limits are set by employer or country standards.
Engineering Controls: Use chemical fume hood for laboratory operations, or local exhaust ventilation for production settings.
Personal Protective Equipment: Chemical splash goggles, gloves resistant to chemical contact (nitrile, neoprene), long-sleeved flame-retardant lab coat, and NIOSH/MSHA-approved respirators if airborne exposure risk exists.
Hygiene Measures: Wash hands thoroughly after work, remove contaminated clothing, avoid rubbing eyes during or after work.
Monitoring: Regular air monitoring for particulate contamination, surface cleanliness checks, periodic review of standard operating procedures
Physical State: Powder or micro-crystalline solid
Color: Off-white to light beige, may vary based on purity
Odor: Faint, not strong or characteristic
Molecular Weight: Calculated from molecular formula, varies by lot
pH: Not available; solution pH may be neutral to slightly acidic
Melting Point: Expected above 150°C (no precise published data; check batch COA)
Boiling Point: Decomposes before boiling
Solubility: Soluble in water, ethanol, and certain organic solvents, but precipitation can occur at high concentrations
Flash Point: Not established; not expected to pose a significant fire hazard
Vapor Pressure: Low; unlikely to sublime under normal laboratory conditions
Other: No significant evaporative emissions at room temperature; stable under dry storage
Chemical Stability: Maintains stability under recommended storage; avoid exposure to moisture and elevated temperatures over extended periods.
Reactivity: May react with strong acid, base, oxidizer, or reducing agent resulting in byproduct formation.
Hazardous Decomposition Products: Likely to yield nitrogen oxides, hydrochloric acid, cyanide fragments, and carbon monoxide under fire or decomposition conditions.
Incompatible Materials: Do not combine with strong mineral acids, chlorine donors, or reactive metals.
Conditions to Avoid: Humidity, open flames, ignition sources, uncontrolled heating or mechanical shock
Polymerization: Not expected under normal handling
Acute Toxicity: No large-scale human data; based on structural analogues, may cause irritant effects to eyes, skin, respiratory tract;
Skin Contact: May produce irritation, redness, or dryness on prolonged exposure; not a known corrosive
Eye Contact: Contact can lead to stinging, irritation, watering, and possible transient blurred vision
Inhalation: Dust inhalation may result in coughing, sneezing, or throat irritation; excessive exposure may aggravate asthma
Ingestion: May disturb digestive system, with nausea, stomach discomfort, vomiting; unknown if acutely toxic in small accidental intake
Chronic Effects: Long-term health impacts not established; prudent to assume possibility of skin sensitization or allergenic potential in susceptible workers
Additional Information: No recorded evidence for mutagenicity, carcinogenicity or reproductive effects; users with pre-existing conditions like dermatitis or respiratory allergies may experience more acute symptoms
Toxicity to Aquatic Life: No concrete data available; based on composition, runoff may cause harm to aquatic invertebrates or algae
Persistence and Degradability: Expected to show moderate persistence, with slow breakdown in natural settings
Bioaccumulation Potential: Unlikely due to polarity, but fragment accumulation possible with repeated exposure in sludge or soil
Mobility in Soil: Readily soluble fraction can disperse after spills or improper disposal
Other Adverse Effects: Minimize product entry into environment; hazardous if large quantities enter water or wastewater treatment streams
Waste Disposal Methods: Dispose in accordance with national or local chemical waste regulations as hazardous laboratory waste
Container Handling: Rinse empty containers with water; destroy by controlled incineration or send to certified hazardous waste facility
Special Precautions: Do not mix with general refuse or pour down drain. Waste solutions must be neutralized before disposal where legally accepted
Unused Product: Return to chemical supplier for take-back, or seal for authorized waste contractor
Environmental Note: Limit product tracking into the environment by controlling lab run-off and securely storing solid residues
UN Number: None assigned for this specific compound; ship as non-regulated research chemical unless mixed with hazardous solvents
Proper Shipping Name: Research chemical, not otherwise specified
Transport Hazard Class: Not classified as hazardous, but caution required to avoid spills in transit
Packing Group: Not applicable under excluded materials provisions
Transport Labeling: Use “Laboratory Chemical” or “Research Use Only” marking, include emergency contact information
Environmental Hazards: Not considered marine pollutant; avoid loading with food or feed items
Special Transport Precautions: Secure containers, seal in secondary packaging, use absorbent liner for air or ground shipping
Safety, Health, and Environmental Regulations: Subject to general laboratory chemical regulatory controls (OSHA, WHMIS, GHS, REACH); not specifically listed in US TSCA, CERCLA, or SARA lists to date
Labeling Requirements: Must include risk and safety statements, batch numbers, contact information, and indication of restricted laboratory use
Reporting Obligations: Report significant workplace exposure or accidental release to local environmental and occupational health authorities
Restrictions on Use: Not approved for drug, food additive, or cosmetic use; research and development only
Other Registry Listings: Review with Safety Data administration agencies; maintain registration in chemical inventory if stockpiled above threshold amounts
Providing high-quality chemical products and logistics solutions for global trade partners.
