Material Safety Data Sheet: 1,3-Propanediol 2-[2-(2-amino-6-chloro-9H-purin-9-yl)ethyl]-

Identification

Product Name: 1,3-Propanediol 2-[2-(2-amino-6-chloro-9H-purin-9-yl)ethyl]-
Chemical Formula: C10H16ClN5O2
Synonyms: Not commonly known by synonyms; specialized compound
Recommended Use: Research, pharmaceutical intermediate
Supplier Details: Name of the supplying company, address, phone number, emergency contact number
Emergency Telephone: Local poison control or company emergency hotline

Hazard Identification

Hazard Classification: Acute Toxicity (oral, inhalation), Irritant (eye/skin)
Label Elements: Pictogram for toxicity, exclamation mark for irritant
Signal Word: Warning
Hazard Statements: Harmful if swallowed, causes eye and skin irritation, may cause respiratory irritation
Precautionary Statements: Avoid breathing dust, wash skin thoroughly after handling, use only outdoors or in a well-ventilated area, wear protective gloves/eye protection, seek medical advice in case of contact or symptoms
Routes of Exposure: Inhalation, ingestion, skin, eyes
Other Hazards: Prolonged exposure may harm liver or kidneys, toxic to aquatic life in case of spillage, dust formation can create respiratory issues

Composition / Information on Ingredients

Chemical Name: 1,3-Propanediol 2-[2-(2-amino-6-chloro-9H-purin-9-yl)ethyl]-
CAS Number: Assigned upon regulatory listing, please refer to supplier
Concentration: >98% (assumed for research grade)
Impurities: Negligible, below reporting threshold for most lab samples
Additives: None declared

First Aid Measures

Inhalation: Move the individual to fresh air, support breathing, seek medical attention if symptoms persist, monitor for cough or breathing difficulty
Skin Contact: Remove contaminated clothing, rinse skin thoroughly with water, wash exposed area with soap and water, seek medical advice if skin irritation develops
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses, continue rinsing, seek medical care if irritation continues
Ingestion: Do not induce vomiting, rinse mouth, drink water if conscious, get medical help immediately
Most Important Symptoms: Redness, irritation, coughing, shortness of breath, nausea, headache

Fire-Fighting Measures

Suitable Extinguishing Media: Water spray, carbon dioxide, dry chemical powder, foam
Unsuitable Extinguishing Media: Direct solid water jet (risk of spreading the material)
Specific Hazards: Releases toxic fumes such as nitrogen oxides, hydrogen chloride under fire conditions
Protective Equipment: Full protective gear including SCBA, chemical resistant clothing
Special Procedures: Prevent runoff into drains, cool containers with water spray

Accidental Release Measures

Personal Precautions: Evacuate area, keep unnecessary personnel away, avoid dust generation, ventilate area
Protective Equipment: Respirator, gloves, goggles, lab coat
Environmental Precautions: Prevent material from reaching drains or watercourses
Cleanup Methods: Collect solid material using non-sparking tools, keep in sealed, labeled containers for disposal, clean contaminated area with water

Handling and Storage

Handling: Use local exhaust or fume hood, avoid skin and eye contact, prevent dust accumulation, do not eat or drink near work area
Storage: Store in tightly sealed original container, keep in cool, dry, well-ventilated area, segregate from incompatible substances, secure against unauthorized access, avoid excessive temperature and direct sunlight, label storage area clearly

Exposure Controls and Personal Protection

Engineering Controls: Laboratory fume hood, mechanical ventilation, eye wash station, safety shower
Personal Protective Equipment: Chemical resistant gloves (nitrile), safety goggles, lab coat, respirator suitable for dust
Hygiene Measures: Wash hands thoroughly after use, avoid touching face, remove contaminated clothing and wash before reuse
Occupational Exposure Limits: No specific limits assigned, use general particulate exposure guidance (OSHA, ACGIH TLV)
Environmental Protection: Do not discharge into drains or environment, use spill trays if transferring bulk quantities

Physical and Chemical Properties

Appearance: White to off-white crystalline solid or powder
Odor: Practically odorless or faint amine smell
pH: Slightly basic, soluble fraction in water
Melting Point/Range: Estimated 150–175℃ (decomposes at higher temperatures)
Boiling Point: Not applicable (may decompose before boiling)
Solubility: Soluble in water and organic solvents such as methanol, DMSO
Vapor Pressure: Low, not likely to vaporize at room temperature
Flash Point: Not established, presumed to be high
Density: Approx. 1.3 g/cm3
Other Data: Stable under normal storage, may react with acids or strong oxidants

Stability and Reactivity

Chemical Stability: Stable under recommended storage and handling conditions
Reactivity: May undergo hazardous reaction with strong oxidizers, acids, bases
Decomposition Products: Nitrogen oxides, HCl, carbon oxides under fire or thermal decomposition
Polymerization: No known hazardous polymerization
Conditions to Avoid: Heat, flames, sources of ignition, moisture, incompatible chemicals

Toxicological Information

Acute Toxicity: Harmful if swallowed or inhaled, may cause central nervous system depression
Skin Corrosion/Irritation: Causes moderate skin irritation, redness, dryness
Serious Eye Damage/Irritation: Causes moderate to severe eye irritation
Respiratory Sensitization: May trigger coughing or breathing difficulty on inhalation
Repeated Exposure: Possible liver or kidney damage from extended or repeated exposure
Carcinogenicity: No data indicating human carcinogenic potential
Mutagenicity: Data lacking for overall evaluation, similar purines may cause genetic changes in certain tests
Reproductive Toxicity: No clear evidence, limited studies available
Other Effects: Prolonged contact may exacerbate pre-existing respiratory or skin conditions

Ecological Information

Ecotoxicity: Toxic to aquatic organisms, risk of long-term effects in aquatic environment
Persistence and Degradability: Limited data, similar compounds biodegrade slowly
Bioaccumulation: Potential for moderate accumulation in aquatic life
Mobility in Soil: Likely to partition to water phase, moderate solubility
Other Adverse Effects: Avoid environmental release, special disposal precautions for contaminated material

Disposal Considerations

Waste Treatment Methods: Collect material in suitable, labeled, tightly sealed containers
Disposal: Dispose of in accordance with local, regional, and national regulations for hazardous laboratory chemicals
Contaminated Packaging: Triple rinse containers, dispose as hazardous lab waste
Do Not: Pour down drain, incinerate without authorization, dump in uncontrolled areas

Transport Information

UN Number: To be assigned by regulatory agency if classified as dangerous goods
UN Proper Shipping Name: Consult regulatory resources; handle as a restricted laboratory chemical if applicable
Transport Hazard Class: As per risk assessment, typically handled as hazardous chemical
Packing Group: Designate as per container size and hazard
Special Precautions: Protect from physical damage, keep upright, transport in secure containers, provide detailed documentation to handlers

Regulatory Information

Safety, Health, Environmental Regulations: Comply with national chemical inventory listings (TSCA, REACH, DSL), OSHA hazardous chemical standard, lab specific rules
Labeling Requirements: Hazard pictograms, risk and safety phrases, warning and first aid measures, supplier and batch information
Restrictions: Not for human or animal drug, food, cosmetic use, for laboratory/research use only
Other Requirements: Staff training on handling hazardous materials, periodic review of procedures, documentation of exposure and incident records