Product Name: (±)-1-((2-(3,4-Dimethoxyphenyl)ethyl)amino)-3-(3-methylphenoxy)-2-propanol Hydrochloride
Chemical Family: Beta-adrenergic antagonist
Synonyms: None reported for this compound
Recommended Use: Research, laboratory chemical
Manufacturer Information: Supplier’s details including contact email and emergency phone provided on request to aid safe handling
GHS Classification: Not classified as hazardous under GHS criteria; effects on humans require further evidence
Health Hazards: Irritation possible to eyes, skin, or respiratory system following direct exposure; ingestion can cause discomfort or nausea
Environmental Hazards: Potential water contaminant; no large-scale aquatic toxicity data
Hazard Pictograms: Not applicable; signal word usually not assigned
Precautionary Statements: Avoid contact with skin, eyes, and clothing; avoid inhalation; prevent uncontrolled release into the environment
Chemical Identity: (±)-1-((2-(3,4-Dimethoxyphenyl)ethyl)amino)-3-(3-methylphenoxy)-2-propanol Hydrochloride
CAS Number: Unique identifier not publicly established
Concentration: >98% as supplied; trace impurities below significant thresholds
Impurities: No specific hazardous impurities reported above regulatory minimums
Inhalation: Move to fresh air; keep at rest and monitor for respiratory distress; provide oxygen if needed; seek medical review for strong symptoms
Skin Contact: Wash exposed areas thoroughly with soap and water; remove contaminated clothing or shoes
Eye Contact: Rinse cautiously with water for several minutes; lift eyelids if necessary; seek prompt medical advice if irritation continues
Ingestion: Rinse mouth; give water if victim fully conscious; do not induce vomiting unless told by medical personnel; consult healthcare professional
Suitable Extinguishing Media: Powder, carbon dioxide, or appropriate foam; use water spray for larger fires
Unsuitable Extinguishing Media: Avoid strong water jets that may spread the material
Hazardous Combustion Products: May release hydrochloric acid fumes, nitrogen oxides, carbon monoxide, carbon dioxide, and possibly toxic phenolic compounds
Protective Equipment: Full protective clothing with self-contained breathing apparatus recommended for fire conditions
Advice for Firefighters: Move containers from fire if safe to do so; cool nearby containers with water spray to prevent rupture; control runoff water to avoid environmental contamination
Personal Precautions: Wear gloves, protective goggles, and appropriate clothing; prevent dust formation; ensure adequate ventilation
Environmental Precautions: Prevent release into sewers, surface waters, and soil; use containment bunds or absorbent materials as needed
Methods for Cleanup: Sweep or vacuum up with non-sparking tools; avoid raising dust; transfer collected material into suitable, labeled hazardous waste containers; clean spill area thoroughly with water and detergent
Emergency Procedures: Evacuate unnecessary personnel; notify supervising staff; ventilate area until air sampling shows safe levels
Safe Handling Notes: Use only in well-ventilated areas; avoid breathing dust, vapor, or mist; practice strict hygiene—wash hands and exposed skin after use and before food preparation; maintain good housekeeping to reduce risk
Storage Conditions: Store tightly closed in a cool, dry, well-ventilated facility; avoid direct sunlight, excess heat, and incompatible chemicals (including strong acids, bases, oxidizers)
Storage Incompatibilities: Separate from food and beverages; store away from incompatible chemical classes; lock or restrict access when not in use
Exposure Limits: No formal occupational exposure limits established for this compound
Engineering Controls: Laboratory fume hood or local exhaust ventilation for powder handling
Personal Protective Equipment: Chemical splash goggles or face shield, gloves (nitrile or comparable), lab coat, enclosed shoes
Hygiene Measures: Avoid eating, drinking, or smoking during use; wash thoroughly after handling; remove and wash contaminated clothing before reuse
Environmental Controls: Use traps, sinks, or containment to prevent environmental releases; monitor workplace air concentration if available
Appearance: White to off-white crystalline powder
Odor: Odorless or faintly aromatic
Melting Point: Specific value unavailable; typically within 140–170 °C judging by structural analogs
Boiling Point: Decomposes before boiling
Solubility: Freely soluble in water and polar solvents
pH: Approximately 5.0–6.0 (for 1% aqueous solution)
Flash Point: Information not available; estimated high compared to common laboratory solvents
Partition Coefficient (Log P): Estimated moderate based on structure—value near 2
Vapor Pressure: Negligible at room temperature
Density: Not determined; expected near 1.1 g/cm³
Other Properties: Stable under normal lab conditions; may yellow under prolonged light or heat exposure
Chemical Stability: Stable in cool, dry, and dark storage over months when tightly sealed
Possible Reactions: Decomposition under strong acids, oxidizers, or prolonged heating
Hazardous Decomposition Products: Hydrogen chloride, phenolic and aromatic vapors, carbon oxides
Incompatible Materials: Avoid strong oxidizers, concentrated acids or bases due to risk of violent reaction or decomposition
Polymerization: No dangerous polymerization reported
Acute Toxicity: Exact LD50 values unavailable; expected to have moderate oral toxicity based on class effects
Routes of Exposure: Possible via ingestion, inhalation, or dermal/ocular contact
Symptoms: May include nausea, dizziness, headache, skin or eye irritation, central nervous system symptoms, cardiovascular effects with larger exposures
Chronic Exposure: No long-term studies; class effects suggest risk to heart rate, blood pressure with significant exposure
Carcinogenic, Mutagenic, Reproductive Toxicity: No data supporting classification; not listed as carcinogen by NTP, IARC, or OSHA
Sensitization: Not expected but avoid repeated unprotected handling
Aquatic Toxicity: Data lacking, caution warranted; related compounds display mild toxicity to aquatic life
Persistence/Degradability: Likely to be persistent in water and sediment; degradation slow under standard environmental conditions
Bioaccumulative Potential: Moderate based on physicochemical properties and moderate Log P
Mobility in Soil: Soluble, potential for water contamination; stay vigilant about unintentional releases
Other Environmental Concerns: Limited plant or microbe uptake expected; recommend dedicated disposal routes to minimize local and global impact
Disposal Methods: Collect as hazardous waste per local, state, and federal rules; consult environmental agency or hazardous waste expert for appropriate chemical removal
Contaminated Packaging: Dispose packaging as hazardous material; decontaminate or triple rinse before disposal if possible; follow incineration or secured landfill guidance
Off-Site Disposal: Licensed chemical disposal contractors preferred for destruction or energy recovery
UN Number: Not regulated for most land, sea, or air transport
Proper Shipping Name: Chemical substance, not otherwise specified
Transport Hazard Class: None assigned
Packing Group: Not determined
Special Provisions: Ship in original, sealed, labeled container; provide documentation identifying it as a research chemical; always comply with shipping regulations for laboratory chemicals
US Regulations: Not specifically listed by EPA, TSCA, or CERCLA; universal chemical hygiene rules apply
EU Registration: In line with REACH minimum quantity exemptions for research and development
Labeling Requirements: Provide full chemical name, hazard statement if applicable, lab/supplier details
Other Regulatory Notes: Research chemicals often exempt from bulk regulatory controls but must follow institutional and local chemical safety policy; SDS available on request for workplace safety audits or incident tracking
Providing high-quality chemical products and logistics solutions for global trade partners.
