Product Name: 1,2,2,6,6-Pentamethyl-Piperidintartrate (1:1)
Synonyms: PMPT Tartrate, Pentamethylpiperidine Tartrate
Chemical Family: Piperidine derivatives
Recommended Use: Laboratory reagent, chemical synthesis intermediate
Supplier: Contact supplier for specific address and emergency phone number
Emergency Contact: Local health and safety authority, poison control center
CAS Number: Data available from manufacturer
Product Code: Refer to purchase label
Classification: Irritant to eyes and skin; harmful if swallowed
GHS Label Elements: Exclamation mark symbol, warning signal word
Hazard Statements: Causes moderate skin irritation; may cause eye redness; could irritate respiratory tract if inhaled
Precautionary Statements: Avoid breathing dust or vapors; wear gloves and eye protection
Potential Health Effects: Skin exposure may lead to irritation; ingestion can cause nausea, dizziness; dust inhalation can trigger mild coughing
Chronic Effects: Continuous exposure may dry or crack skin; prolonged eye contact risks increased inflammation
NFPA Ratings: Health: 2; Flammability: 1; Reactivity: 0
Chemical Name: 1,2,2,6,6-Pentamethyl-Piperidintartrate
Molecular Formula: C13H25NO2∙C4H6O6
Weight Percent: Pure compound, up to 100%
Impurities: Trace solvents (less than 0.1%) from synthesis
Ingredient Disclosure: Single substance of defined composition
Additional Components: No fillers or known stabilizers declared
CAS Information: Specific entry per supplier's regulatory listing
Eye Contact: Rinse cautiously with water for at least 15 minutes, lift upper and lower lids, remove contact lenses if possible
Skin Contact: Wash thoroughly with soap and water, remove contaminated clothing
Inhalation: Move to fresh air, monitor for respiratory symptoms, seek medical attention if irritation or coughing persist
Ingestion: Rinse mouth, drink water if conscious, do not induce vomiting, call medical help
Acute Symptoms: Eye and skin irritation, stomach upset if swallowed
Required Medical Attention: If symptoms continue or worsen, consult a healthcare professional
Extinguishing Media: Water spray, foam, dry chemical, carbon dioxide
Unsuitable Extinguishing Media: Direct water jet on burning substance
Specific Hazards: Combustion may form toxic fumes such as carbon monoxide, nitrogen oxides
Special Protective Equipment: Firefighters should wear self-contained breathing apparatus with full protective gear
Advice for Firefighters: Stay upwind, use standard procedures for chemical fires, contain runoff to prevent contamination
Personal Precautions: Avoid contact with skin and eyes; ventilate area
Protective Equipment: Chemical-resistant gloves, protective clothing, safety goggles, filtering mask for dust
Emergency Procedures: Stop spill at source, evacuate unprotected personnel
Containment: Stop leak if safe to do so, avoid creating dust, do not let chemicals enter drains
Cleanup Methods: Sweep up and place in suitable container for disposal, wipe surfaces with damp cloth, wash residue with plenty of water
Handling: Wear protective gloves, avoid breathing dust, clean spills immediately, use in well-ventilated area
General Hygiene: Wash hands after handling, do not eat or drink during use, keep workspaces tidy
Storage Conditions: Keep container tightly closed, store in cool, dry place away from incompatible materials
Incompatible Materials: Strong oxidizers, strong acids or bases
Container Materials: Use original packaging or equivalent chemical-resistant containers
Engineering Controls: Use fume hood or adequate ventilation to minimize exposure
Biological Monitoring: Not required under normal use conditions
Personal Protective Equipment: Nitrile gloves, chemical splash goggles, laboratory coat
Respiratory Protection: Use approved dust mask if ventilation insufficient
Work Practices: Change contaminated clothing, keep containers closed when not in use
Exposure Limits: No occupational limits established; minimize exposure according to best laboratory practices
Physical State: Solid, crystalline powder
Color: White to slightly off-white
Odor: Mild, amine-like
Melting Point: Reported around 120–130°C
Boiling Point: Decomposes before boiling
Solubility: Soluble in water and ethanol
Density: Estimated 1.2–1.3 g/cm³
Vapor Pressure: Negligible at room temperature
pH (in solution): Slightly acidic due to tartrate group
Flammability: May burn if heated, not considered highly flammable
Chemical Stability: Stable under recommended storage conditions
Reactivity: No dangerous reactions known under normal conditions
Hazardous Reactions: Avoid contact with oxidizing agents, acids, or strong bases
Thermal Decomposition: Produces carbon oxides and nitrogen oxides on heating
Conditions to Avoid: Heat, moisture, incompatible chemicals
Polymerization: Does not undergo hazardous polymerization
Acute Toxicity: Data limited, ingestion or inhalation can result in gastrointestinal or respiratory discomfort
Skin Corrosion/Irritation: May cause noticeable redness or dryness with prolonged contact
Eye Damage/Irritation: Contact leads to irritation, redness, watering
Respiratory Sensitization: Not classified as a sensitizer
Carcinogenicity: No studies indicating carcinogenic potential
Chronic Effects: Long-term regular exposure could aggravate respiratory or skin conditions
Other Information: No evidence for mutagenicity, reproductive toxicity in provided data
Ecotoxicity: No detailed data for aquatic or soil organisms, precaution recommends avoidance of environmental release
Persistence/Degradability: Organic compound expected to degrade under standard environmental conditions
Bioaccumulative Potential: Low, based on solubility and structure
Mobility in Soil: Likely to dissipate through water transport due to solubility
Additional Information: Prevent runoff into sewers and waterways, collect spills and waste
Waste Treatment Methods: Dispose via licensed waste contractor, follow regulations for hazardous chemical disposal
Product Disposal: Do not discharge into drains or environment, collect and hand over to approved recycler
Container Disposal: Clean containers may be recycled or disposed as per local requirements, ensure no residues
Regulatory Status: Regard as hazardous laboratory waste unless advised otherwise by regulatory authority
Special Precautions: Follow all safety instructions on disposal to avoid exposure or environmental release
UN Number: Not classified as dangerous for transport
Proper Shipping Name: Specify as laboratory chemical sample
Transport Hazard Class: Not regulated, handle as chemical goods
Packing Group: No special packing restrictions
Environmental Hazards: Not considered marine pollutant
Special Precautions for Transport: Avoid heat or moisture, use sealed packaging
Labelling Requirements: Follows GHS/CLP regulations for laboratory chemicals
Inventory Status: Confirm with local chemical inventories (REACH, TSCA, etc.)
Applicable Regulations: OSHA, EU chemical safety directives, appropriate national workplace safety rules
Hazard Symbols: Warning exclamation mark required
Safety Phrases: Wear protective gear, avoid direct contact, keep away from children and unauthorized personnel
Other Regulations: Follow local, regional, and national guidelines for use, handling, and disposal
Providing high-quality chemical products and logistics solutions for global trade partners.
