Product Name: (αS,βS)-β-Amino-α-[[1-[[4-(2-pyridinyl)phenyl]methyl]hydrazino]methyl]benzenepropanol Trihydrochloride
Chemical Family: Substituted hydrazine-based compounds
SYNONYMS: None available in current chemical registries
Uses: Intended for laboratory research. Not for human or veterinary diagnostic or therapeutic use.
Supplier Information: Contact the distributing chemical supplier listed on shipping documents.
Emergency Phone: Refer to local or national poison control and emergency response agencies for guidance.
Product Code: Use manufacturer’s specific identifier.
GHS Classification: Acute toxicity (oral, dermal, inhalation), skin and eye irritation, may cause organ damage through prolonged exposure, possible carcinogen based on structural analogs.
Label Elements: Signal word: Danger; Pictograms: Skull and crossbones, corrosion, exclamation mark
Hazard Statements: Toxic if swallowed, harmful in contact with skin, causes serious eye damage, may cause long-lasting harmful effects to aquatic life.
Precautionary Statements: Wash hands thoroughly after handling, avoid breathing dust, do not eat, drink, or smoke during use.
Potential Health Effects: Eye contact can cause severe irritation or burns, skin exposure leads to redness or rash, inhalation produces respiratory tract irritation, ingestion results in gastrointestinal distress and systemic toxicity.
Target Organs: Central nervous system, liver, kidneys.
Chemical Name: (αS,βS)-β-Amino-α-[[1-[[4-(2-pyridinyl)phenyl]methyl]hydrazino]methyl]benzenepropanol Trihydrochloride
CAS Number: Unknown, compound not currently indexed in major registries.
Concentration: 98 – 100% (pure substance)
Impurities: Possible trace decomposition products (hydrazine derivatives, hydrochloride-related materials, other synthetic intermediates)
Eye Contact: Flush immediately with copious amounts of water for at least 15 minutes. Remove contact lenses if present. Seek urgent medical advice.
Skin Contact: Rinse thoroughly with plenty of soap and water, remove contaminated clothing and shoes, continue washing even if no symptoms appear. Consult a healthcare provider.
Inhalation: Move person to fresh air, keep warm and at rest. If breathing difficulty arises, give oxygen and call for medical assistance without delay.
Ingestion: Rinse mouth, do not induce vomiting unless instructed by medical personnel. Get immediate medical attention.
Important Symptoms: Burning sensations, cough, shortness of breath, nausea, abdominal cramps.
Advice for Physicians: Treat symptomatically, monitor respiratory and cardiac function, consider gastric lavage only after professional risk assessment.
Suitable Extinguishing Media: Water spray, dry chemicals, carbon dioxide, or alcohol-resistant foam.
Unsuitable Media: Direct water jets may spread material.
Hazards from Combustion: May give off toxic fumes including nitrogen oxides, carbon monoxide, hydrochloric acid vapors, and other unidentified residues.
Protective Equipment: Wear full protective gear, self-contained breathing apparatus, and chemical-resistant clothing.
Fire-Fighting Procedures: Avoid inhaling smoke, move containers away from fire zone if safe, use water spray to cool exposed surfaces.
Personal Precautions: Evacuate non-essential personnel, only responders trained in chemical spill management should approach; use chemical splash goggles, gloves, lab coat, and suitable respirator as per air levels.
Environmental Precautions: Prevent substance from entering waterways, drains, or soil, use absorbents capable of binding organic toxins, and notify environmental authorities if large quantities escape.
Methods for Cleaning Up: Contain spill with inert absorbent material (vermiculite, dry sand), collect in approved drums, clean residue with detergent and large volumes of water, dispose as hazardous waste.
Decontamination: Ventilate area, wash clothing and equipment before reuse.
Precautions for Safe Handling: Handle under a chemical fume hood, avoid direct overexposure to dust, do not pipette by mouth or eat, drink, or smoke while handling product. Only use equipment rated for chemical compatibility.
Storage Requirements: Keep container tightly closed, in a dry, well-ventilated location, away from incompatible materials such as oxidizers, acids, and bases. Store at room temperature unless specified otherwise by manufacturer.
Other Notes: Regularly check for leaks or other failures, keep away from heat, sparks, and open flames. Store in original or compatible secondary container with clear labeling.
Exposure Limits: No established OSHA or ACGIH exposure limits, but treat as potentially hazardous based on toxicity profile.
Engineering Controls: Use certified fume hoods, local exhaust ventilation, and closed process systems if available.
Personal Protection: Eyes: Chemical splash goggles, face shield if risk of splashing; Skin: impervious gloves, lab coats, chemical-resistant aprons; Respiratory: NIOSH-approved respirators if dust or vapor risk exists; Hygiene: Wash hands after each use, do not wear contaminated clothing outside work area.
Appearance: Off-white to pale yellow crystalline powder
Odor: Mild amine-like, slightly acrid
Melting Point/Range: Estimated 130–145°C
Boiling Point: Not available (solid decomposes prior to boiling)
pH Value: Acidic in water solution, usually between 2–3
Solubility: Moderately soluble in water, low solubility in organic solvents
Vapor Pressure: Negligible at standard temperature
Density: Approx. 1.4–1.6 g/cm³
Other Data: Decomposes above 150°C, emits toxic fumes upon strong heating
Chemical Stability: Stable under recommended storage and handling conditions, sensitive to moisture and strong light.
Reactivity: Reacts with strong oxidizing agents, acids, bases, and may degrade in the presence of iron or copper ions.
Hazardous Reactions: Violent reactions possible with incompatible reagents (especially oxidizers and strong acids).
Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, oxides of phosphorus, hydrochloric acid vapors.
Polymerization: Product does not polymerize under normal conditions.
Likely Routes of Exposure: Absorption through eyes, skin, inhalation, and ingestion.
Symptoms: Respiratory tract irritation, headache, dizziness, skin rash, redness, severe eye irritation, gastrointestinal upset if ingested.
Acute Toxicity: Estimated LD50 (oral, rat) between 80–300 mg/kg, LD50 (dermal) >2000 mg/kg.
Chronic Toxicity: Long-term exposure may damage liver, kidneys, and central nervous system, potential developmental or reproductive impacts not fully studied.
Carcinogenicity: Not classified by IARC, ACGIH, or NTP; analog compounds have shown evidence of carcinogenicity in animal studies.
Mutagenicity: No direct data, but structure suggests possible risk, especially through hydrazine moiety.
Aquatic Toxicity: Toxic to aquatic organisms, may cause long-term adverse effects in the ecosystem, slow to degrade in water.
Persistence and Degradability: Limited data; structure suggests persistent environmental impact.
Bioaccumulation: Expected to have moderate potential due to stable aromatic rings.
Soil Mobility: May bind strongly to soils based on structure, breakthrough to groundwater less likely but possible in certain conditions.
Other Harmful Effects: Hydrazine by-products formed during decomposition may increase overall toxicity when released.
Waste Treatment Methods: All remnants, spill cleanup materials, and contaminated containers must be treated as hazardous waste. Incinerate in an approved facility using flue gas scrubbers for acid gases and nitrogen oxides.
Packaging Disposal: Triple rinse empty containers, destroy to prevent reuse, dispose in accordance with chemical waste regulations.
Legal Requirements: Comply with local, regional, and national laws concerning the disposal of hazardous chemicals, including US EPA and EU REACH/CLP rules where applicable.
Avoidance Practices: Do not dump into drains, environment, or household garbage.
UN Number: Seek guidance from the supplier or competent authority based on shipment route and transport mode.
Transport Hazard Class: Toxic solid (organic, n.o.s.), possible Class 6.1 or similar toxic substance designation.
Packing Group: Usually Group II or III (confirmed by actual toxicity data).
Special Transport Precautions: Ensure secure, upright packaging with clear hazard labeling, separation from food and feedstuffs, apply secondary containment for bulk shipments.
Label Required: Toxic, corrosive substance, as per IMDG/ICAO/IATA requirements.
Classification and Labeling: Complies with GHS global harmonized standards and occupational safety regulations as enforced in the shipping and handling jurisdiction.
Inventory Listings: New chemical (not on typical US TSCA, EU EINECS/ELINCS, Canadian DSL or China IECSC); subject to pre-market notification in many regions due to complex structure and reactivity.
Workplace Control: Requires documented exposure monitoring, safety training, and chemical hygiene program in labs and manufacturing settings.
Restricted Use: Not registered or approved for use in food, drugs, cosmetics, or pesticides.
Other Controls: All persons handling material must demonstrate familiarity with risk management procedures, and maintain access to SDS on site at all times.
Providing high-quality chemical products and logistics solutions for global trade partners.
